XC6217_2 Datasheet, PDF (1/33 Pages) Torex Semiconductor – High Speed "Green Operation" LDO Voltage Regulators

XC6217 Series
ETR0322_013a
High Speed "Green Operation" LDO Voltage Regulators
☆GreenOperation Compatible
■GENERAL DESCRIPTION
The XC6217 series are precise, low noise, high speed, low dropout regulators with green operation (GO) function. They are
fabricated using Torex’s CMOS process. Performance features of the series include high ripple rejection and low dropout
voltage, and the series include a reference voltage source, an error amplifier, a current limiter, and a phase compensation
circuit.
GO provides high speed operation, low power consumption and high efficiencies by automatically switching between a high
speed mode (HS) and a power save mode (PS) depending upon the load current level. The switching point of the GO to the
output current is being fixed inside the IC. When only high-speed operation is required, it can be fixed by inputting a high level
signal to the GO pin, thus providing operating conditions with the most suitable level of supply current for the application.
The CE function enables the output to be turned off resulting in greatly reduced power consumption. In this state, with the
XC6217B/D series, the IC turns on the internal switch located between the V_OUT and V_SS pins. This short enables the electric
charge at the output capacitor (C_L) to be discharged via the internal auto-discharge resistance, and as a result the V_OUT pin
quickly returns to the V_SS level. The series' output stabilization capacitor (C_L) is also compatible with low ESR ceramic
capacitors.
Output voltage is selectable in 0.05V increments within a range of 0.80V~4.00V, using laser trimming technologies.
The current limiter's foldback circuit also operates as a short circuit protection for the output current limiter and the output pin.
■APPLICATIONS
●Cellular phones
●Cordless phones
●Wireless communication equipment
●Portable games
●Cameras, VCRs
●Portable AV equipment
●PDAs
■FEATURES
Output Current
: 200mA <Limit: 250mA (TYP.)>
Dropout Voltage
Operating Voltage Range
Output Voltage Range
Accuracy
Low Power Consumption
: 80mV@ I_OUT=100mA, V_OUT=3.0V
: 1.6V ~ 6.0V (0.8V≦V_OUT≦1.55V
: 1.8V ~ 6.0V (1.6V≦V_OUT≦4.0V
: 0.80V~4.00V (0.05V increments)
: +2% (HS: V_OUT >2.00V) (Standard)
+30mV (HS: V_OUT≦1.95V) (Standard)
+2.5%, -3.5% (PS: V_OUT >2.60V) (Standard)
+3.5%, -4.5% (PS:1.60≦V_OUT≦2.55V) (Standard)
+70mV, -90mV (PS:0.80≦V_OUT≦1.55V) (Standard)
+1% (HS: V_OUT >2.00V) (High Accuracy)
+20mV (HS: V_OUT≦1.95V) (High Accuracy)
+1.5%, -2.5% (PS: V_OUT >2.60V) (High Accuracy)
+2.5%, -3.5% (PS:1.60≦V_OUT≦2.55V) (High Accuracy)
+50mV, -70mV (PS:0.80≦V_OUT≦1.55V) (High Accuracy)
: 4.5μA (TYP.) when PS mode
Standby Current
25μA (TYP.) when HS mode
: Less than 0.1μA
High Ripple Rejection
: 70dB @ 1kHz (When HS mode)
Operating Temperature
Low ESR Capacitor
: -40℃~85℃
: 1.0μF Ceramic capacitor
Regulators with Green Operation (GO) Function
C_L High-Speed-Discharge (XC6217B/D)
Packages
: USP-4D, SOT-25(XC6217A/B Type)
SSOT-24,USPN-4(XC6217C/D Type)
Environmentally Friendly : EU RoHS Compliant, Pb Free
■TYPICAL APPLICATION CIRCUIT
V_IN
V_OUT
CE
C_IN
1.0μF
(ceramic)
GO
V_SS
C_L
1.0μF
(ceramic)
■ TYPICAL PERFORMANCE
CHARACTERISTICS
XC6217B281MR
V_IN=3.8V,Tr=Tf=5usec, Ta=25℃
C _IN=C _L=1.0u F( Ceramic)
2.9
3
2.85
2.95
VOUT_HSmode
2.8
2.9
2.75
2.85
V_OUT_GOmode
2.7
2.8
2.65
2.75
2.6
2.7
2.55
2.5
2.45
I_OUT=0.1 mA
2.65
Output Current I_OUT=50mA
2.6
I _OUT=0 .1mA
2.55
2.4
2.5
Time (500usec/div)
1/33