TMS570LS3137_15 Datasheet, PDF (94/173 Pages) Texas Instruments – TMS570LS3137 16- and 32-Bit RISC Flash Microcontroller

TMS570LS3137
SPNS162C – APRIL 2012 – REVISED APRIL 2015
www.ti.com
6.16 DMA Controller
The DMA controller is used to transfer data between two locations in the memory map in the background
of CPU operations. Typically, the DMA is used to:
• Transfer blocks of data between external and internal data memories
• Restructure portions of internal data memory
• Continually service a peripheral
6.16.1 DMA Features
• CPU independent data transfer
• One master port - PortB (64 bits wide) that interfaces to the TMS570 Memory System.
• FIFO buffer(4 entries deep and each 64 bits wide)
• Channel control information is stored in RAM protected by parity
• 16 channels with individual enable
• Channel chaining capability
• 32 peripheral DMA requests
• Hardware and Software DMA requests
• 8-, 16-, 32-, or 64-bit transactions supported
• Multiple addressing modes for source/destination (fixed, increment, offset)
• Auto-initiation
• Power-management mode
• Memory Protection with four configurable memory regions
94
System Information and Electrical Specifications
Copyright © 2012–2015, Texas Instruments Incorporated
Submit Documentation Feedback