MSP430F532X Datasheet, PDF (9/106 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F532x
www.ti.com
TERMINAL
NAME
PN
VCORE ⁽²⁾
20
P1.0/TA0CLK/ACLK
21
P1.1/TA0.0
22
P1.2/TA0.1
23
P1.3/TA0.2
24
P1.4/TA0.3
25
P1.5/TA0.4
26
P1.6/TA1CLK/CBOUT
27
P1.7/TA1.0
28
P2.0/TA1.1
29
P2.1/TA1.2
30
P2.2/TA2CLK/SMCLK
31
P2.3/TA2.0
32
P2.4/TA2.1
33
P2.5/TA2.2
34
P2.6/RTCCLK/DMAE0
35
P2.7/UCB0STE/
UCA0CLK
36
SLAS678D – AUGUST 2010 – REVISED FEBRUARY 2013
Table 3. Terminal Functions (continued)
NO.
RGC
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
ZQE
J2
H2
H3
J3
G4
H4
J4
G5
H5
J5
G6
J6
H6
J7
J8
J9
H7
I/O ⁽¹⁾
DESCRIPTION
Regulated core power supply output (internal use only, no external current
loading)
General-purpose digital I/O with port interrupt
I/O _{TA0 clock signal TA0CLK input}
ACLK output (divided by 1, 2, 4, 8, 16, or 32)
General-purpose digital I/O with port interrupt
I/O _{TA0 CCR0 capture: CCI0A input, compare: Out0 output}
BSL transmit output
General-purpose digital I/O with port interrupt
I/O _{TA0 CCR1 capture: CCI1A input, compare: Out1 output}
BSL receive input
I/O ^{General-purpose digital I/O with port interrupt}
TA0 CCR2 capture: CCI2A input, compare: Out2 output
I/O ^{General-purpose digital I/O with port interrupt}
TA0 CCR3 capture: CCI3A input compare: Out3 output
I/O ^{General-purpose digital I/O with port interrupt}
TA0 CCR4 capture: CCI4A input, compare: Out4 output
General-purpose digital I/O with port interrupt
I/O _{TA1 clock signal TA1CLK input}
Comparator_B output
I/O ^{General-purpose digital I/O with port interrupt}
TA1 CCR0 capture: CCI0A input, compare: Out0 output
I/O ^{General-purpose digital I/O with port interrupt}
TA1 CCR1 capture: CCI1A input, compare: Out1 output
I/O ^{General-purpose digital I/O with port interrupt}
TA1 CCR2 capture: CCI2A input, compare: Out2 output
I/O ^{General-purpose digital I/O with port interrupt}
TA2 clock signal TA2CLK input ; SMCLK output
I/O ^{General-purpose digital I/O with port interrupt}
TA2 CCR0 capture: CCI0A input, compare: Out0 output
I/O ^{General-purpose digital I/O with port interrupt}
TA2 CCR1 capture: CCI1A input, compare: Out1 output
I/O ^{General-purpose digital I/O with port interrupt}
TA2 CCR2 capture: CCI2A input, compare: Out2 output
General-purpose digital I/O with port interrupt
I/O _{RTC clock output for calibration}
DMA external trigger input
General-purpose digital I/O with port interrupt
I/O ^{Slave transmit enable – USCI_B0 SPI mode}
Clock signal input – USCI_A0 SPI slave mode
Clock signal output – USCI_A0 SPI master mode
(2) VCORE is for internal use only. No external current loading is possible. VCORE should only be connected to the recommended
capacitor value, C_VCORE.
Copyright © 2010–2013, Texas Instruments Incorporated
Submit Documentation Feedback
9