SBAU202 Datasheet, PDF (7/47 Pages) Texas Instruments – Performance Demonstration Kit for the ADS130E08

www.ti.com
2.2 Installing the Software
SOFTWARE INSTALLATION
CAUTION
Do not connect the ADS130E08EVM hardware before installing the software on
a suitable PC. Failure to observe this caution may cause Microsoft Windows to
not recognize the ADS130E08EVM.
Download the latest software from the TI website at www.ti.com/tool/ADS130E08EVM-PDK. To install the
ADS130E08 software, unzip and run setup.exe. Figure 3 shows the initialization screen.
Figure 3. Initialization of ADS130E08EVM GUI
You must accept the two license agreements shown in Figure 4 and Figure 5 before the installation can
proceed.
Figure 4. License 1
Figure 5. License 2
2.3 Installing the ADS130E08EVM-PDK Hardware Drivers
2.3.1 Installing the First USB Driver
Apply power to the MMB0 using the supplied wall-mount power supply and connect the MMB0 to your PC
through any available USB port. The Found New Hardware Wizard window appears, as shown in
Figure 6. Note that this is the first of two USB drivers that are installed. Click Next to continue driver
installation.
SBAU202 – June 2012
Submit Documentation Feedback
Performance Demonstration Kit for the ADS130E08
7
Copyright © 2012, Texas Instruments Incorporated