SBAU202 Datasheet, PDF (22/47 Pages) Texas Instruments – Performance Demonstration Kit for the ADS130E08

USING THE SOFTWARE
www.ti.com
4.7 Fault Status Registers (FAULT_STATP and FAULT_STAIN)
The Fault Status registers store the status of whether the positive and/or negative input on each channel
has a fault. This is a convenient feature to help pinpoint if any of the inputs are out of range. The GUI for
this feature is enabled by clicking in the upper right-hand corner of the EVM software on the Show/Poll
Fault Status button, as shown in Figure 20.
Figure 20. Fault Status Indicator
22
Performance Demonstration Kit for the ADS130E08
Copyright © 2012, Texas Instruments Incorporated
SBAU202 – June 2012
Submit Documentation Feedback