DS96F173M_13 Datasheet, PDF (6/12 Pages) Texas Instruments – DS96F173M/DS96F175C/DS96F175M EIA-485/EIA-422 Quad Differential Receivers

DS96F173M/DS96F175C/DS96F175M
SNOSC40F – JULY 2000 – REVISED APRIL 2013
www.ti.com
Electrical Characteristics⁽¹⁾⁽²⁾
Over recommended supply voltage and operating temperature ranges, unless otherwise specified
Symbol
Parameter
Conditions
Min
Max
Units
V_TH
Differential-Input
High Threshold Voltage
V_TL
Differential-Input ⁽³⁾
Low Threshold Voltage
V_IH
Enable Input Voltage HIGH
V_IL
Enable Input Voltage LOW
V_IC
Enable Input Clamp Voltage
V_OH
Output Voltage HIGH
V_OL
Output Voltage LOW
I_OZ
High-Impedance State Output
I_I
Line Input Current ⁽⁴⁾
I_IH
Enable Input Current HIGH
I_IL
Enable Input Current LOW
R_I
Input Resistance
I_OS
Short Circuit Output Current
I_CC
Supply Current
I_CCX
V_CC = 4.5V, 5.5V
V_CM = 0V, 12V, −12V
V_CC = 4.5V, 5.5V
V_CM = 0V, 12V, −12V
I_I = −18 mA, V_CC = 4.5V
V_ID = 200 mV
I_OH = −400 μA
−55°C to +125°C
V_ID = −200 mV
I_OL = 8.0 mA
V_O = 0.4V, 2.4V, V_CC = 5.5V
Other Input = 0V
V_I = 12V
V_I = −7.0V
V_IH = 2.7V, V_CC = 5.5V
V_IL = 0.4V, V_CC = 5.5V
See ⁽⁵⁾
No Load
Outputs Enabled or
Disabled
0.2
V
−0.2
V
2.0
V
0.8
V
−1.5
V
2.5
V
0.45
V
±20
μA
1.0
mA
−0.8
20
μA
−100
μA
10
kΩ
−15
−85
mA
50
mA
(1) Unless otherwise specified min/max limits apply across the 0°C to +70°C range for the DS96F175C. All typicals are given for V_CC = 5V
and T_A = 25°C.
(2) All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless
otherwise specified.
(3) The algebraic convention, when the less positive (more negative) limit is designated minimum, is used in this data sheet for common
mode input voltage and threshold voltage levels only.
(4) Refer to EIA-485 Standard for exact conditions.
(5) Only one output at a time should be shorted.
6
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS96F173M/DS96F175C/DS96F175M