DS96F173M_13 Datasheet, PDF (3/12 Pages) Texas Instruments – DS96F173M/DS96F175C/DS96F175M EIA-485/EIA-422 Quad Differential Receivers

DS96F173M/DS96F175C/DS96F175M
www.ti.com
SNOSC40F – JULY 2000 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings COMMERCIAL⁽¹⁾⁽²⁾
Storage Temperature Range (T_STG)
Lead Temperature (Soldering, 60 sec.)
Max. Package Power Dissipation ⁽³⁾ at 25°C
Ceramic CDIP (NFE)
Supply Voltage
Input Voltage, A or B Inputs
Differential Input Voltage
Enable Input Voltage
Low Level Output Current
−65°C to +175°C
300°C
1500 mW
7.0V
±25V
±25V
7.0V
50 mA
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that
the devices should be operated at these limits. The tables of Electrical Characteristics provide conditions for actual device operation.
(2) Specifications for the 883 version of this product are listed separately.
(3) Derate package 10 mW/°C above 25°C.
Recommended Operating Conditions
Supply Voltage (V_CC) DS96F175C
Common Mode Input Voltage (V_CM)
Differential Input Voltage (V_ID)
Output Current HIGH (I_OH)
Output Current LOW (I_OL)
Operating Temperature (T_A) DS96F175C
Min
Typ
Max
4.75
5.0
5.25
−7
+12
|12|
−400
11
0
25
70
Units
V
V
V
μA
mA
°C
Electrical Characteristics⁽¹⁾⁽²⁾
Over recommended supply voltage and operating temperature ranges, unless otherwise specified
Symbol
Parameter
Conditions
Min Typ Max Units
V_TH
V_TL
V_TH − V_TL
V_IH
V_IL
V_IC
V_OH
V_OL
I_OZ
I_I
I_IH
Differential-Input High Threshold
Voltage
Differential-Input ⁽³⁾ Low Threshold
Voltage
Hysteresis ⁽⁴⁾
Enable Input Voltage HIGH
Enable Input Voltage LOW
Enable Input Clamp Voltage
Output Voltage HIGH
Output Voltage LOW
V_O = V_OH
V_O = V_OL
V_CM = 0V
I_I = −18 mA
V_ID = 200 mV
I_OH = −400 μA
V_ID = −200 mV
High-Impedance State Output
Line Input Current ⁽⁵⁾
V_O = 0.4V to 2.4V
Other Input = 0V
Enable Input Current HIGH
V_IH = 2.7V
0°C to +70°C
−55°C to +125°C
I_OL = 8.0 mA
I_OL = 11 mA
V_I = 12V
V_I = −7.0V
0.2
V
−0.2
V
50
mV
2.0
V
0.8
V
−1.5
V
2.8
V
2.5
0.45
V
0.50
±20
μA
1.0
mA
−0.8
20
μA
(1) Unless otherwise specified min/max limits apply across the 0°C to +70°C range for the DS96F175C. All typicals are given for V_CC = 5V
and T_A = 25°C.
(2) All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless
otherwise specified.
(3) The algebraic convention, when the less positive (more negative) limit is designated minimum, is used in this data sheet for common
mode input voltage and threshold voltage levels only.
(4) Hysteresis is the difference between the positive-going input threshold voltage. V_TH, and the negative going input threshold voltage, V_TL.
(5) Refer to EIA-485 Standard for exact conditions.
Copyright © 2000–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS96F173M/DS96F175C/DS96F175M