English
Language : 

SN74AVCH16T245_15 Datasheet, PDF (5/30 Pages) Texas Instruments – 16-Bit Dual-Supply Bus Transceiver
◁
www.ti.com
SN74AVCH16T245
SCES587D – AUGUST 2004 – REVISED NOVEMBER 2015
7 Specifications
7.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted(1))
VCCA
VCCB
Supply voltage
VI
Input voltage(2)
VO
Voltage applied to any output in the high-impedance or power-off
state (2)
VO
Voltage applied to any output in the high or low state(2)(3)
IIK
Input clamp current
IOK
Output clamp current
IO
Continuous output current
Continuous current through each VCCA, VCCB, and GND
TJ
Junction temperature
Tstg Storage temperature
I/O ports (A port)
I/O ports (B port)
Control inputs
A port
B port
A port
B port
VI < 0
VO < 0
MIN
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–40
–65
MAX
4.6
4.6
4.6
4.6
4.6
4.6
VCCA + 0.5
VCCB + 0.5
–50
–50
±50
±100
150
150
UNIT
V
V
V
V
mA
mA
mA
mA
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input voltage (VI ) and output negative-voltage (VO ) ratings may be exceeded if the input and output current ratings are observed.
(3) The output positive-voltage rating may be exceeded up to 4.6 V maximum if the output current rating is observed.
7.2 ESD Ratings
V(ESD) Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)
Charged-device model (CDM), per JEDEC specification JESD22-
C101 (2)
Machine model (A115-A)
VALUE
±8000
±1000
±200
UNIT
V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with
less than 500-V HBM is possible with the necessary precautions.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with
less than 250-V CDM is possible with the necessary precautions.
Copyright © 2004–2015, Texas Instruments Incorporated
Product Folder Links: SN74AVCH16T245
Submit Documentation Feedback
5
 ▷