OPA172-Q1 Datasheet, PDF (5/36 Pages) Texas Instruments – 36-V, Single-Supply, 10-MHz, Rail-to-Rail Output Automotive Grade Operational Amplifiers

www.ti.com
OPA172-Q1, OPA2172-Q1, OPA4172-Q1
SBOS809 – NOVEMBER 2016
7 Specifications
7.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Voltage
Supply voltage, V+ to V–
Single-supply voltage
Signal input pins voltage⁽²⁾
Current
Temperature
Signal input pins current
Output short-circuit⁽⁴⁾
Operating, T_A
Junction, T_J
Storage, T_stg
Common-mode
Differential ⁽³⁾
MIN
MAX
–20
20
40
(V–) – 0.5 (V+) + 0.5
–0.5
0.5
–10
10
Continuous
–55
150
150
–65
150
UNIT
V
mA
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Transient conditions that exceed these voltage ratings must be current limited to 10 mA or less.
(3) Refer to the Electrical Overstress section for more information.
(4) Short-circuit to ground, one amplifier per package.
7.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per AEC Q100-002⁽¹⁾
Charged-device model (CDM), per AEC Q100-011
VALUE
±4000
±1000
(1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.
UNIT
V
7.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
Supply voltage, (V+) – (V–)
Specified temperature
Single-supply
Dual-supply
MIN
4.5
±2.25
–40
MAX
36
±18
125
UNIT
V
°C
Copyright © 2016, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: OPA172-Q1 OPA2172-Q1 OPA4172-Q1