OPA172-Q1 Datasheet, PDF (28/36 Pages) Texas Instruments – 36-V, Single-Supply, 10-MHz, Rail-to-Rail Output Automotive Grade Operational Amplifiers

OPA172-Q1, OPA2172-Q1, OPA4172-Q1
SBOS809 – NOVEMBER 2016
12 Device and Documentation Support
www.ti.com
12.1 Device Support
12.1.1 Development Support
12.1.1.1 TINA-TI™ (Free Software Download)
TINA-TI™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-
TI™ is a free, fully-functional version of the TINA-TI™ software, preloaded with a library of macro models in
addition to a range of both passive and active models. TINA-TI™ provides all the conventional dc, transient, and
frequency domain analysis of SPICE, as well as additional design capabilities.
Available as a free download from the Analog eLab Design Center, TINA-TI™ offers extensive post-processing
capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select
input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.
NOTE
These files require that either the TINA software (from DesignSoft™) or TINA-TI™
software be installed. Download the free TINA-TI™ software from the TINA-TI™ folder.
12.2 Documentation Support
12.2.1 Related Documentation
For related documentation see the following:
• Feedback Plots Define Op Amp AC Performance (SBOA015)
• EMI Rejection Ratio of Operational Amplifiers (SBOA128)
• Capacitive Load Drive Solution using an Isolation Resistor (TIDU032)
• INA132 Low Power, Single-Supply Difference Amplifier (SBOS059)
• OPAx192 36-V, Precision, Rail-to-Rail Input/Output, Low Offset Voltage, Low Input Bias Current Op Amp with
e-trim™ (SBOS620)
• OPA140 High-Precision, Low-Noise, Rail-to-Rail Output, 11-MHz JFET Op Amp (SBOS498)
• OPA188 Precision, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift Operational Amplifier (SBOS642)
12.3 Related Links
Table 6 lists quick access links. Categories include technical documents, support and community resources,
tools and software, and quick access to sample or buy.
PARTS
OPA172-Q1
OPA2172-Q1
OPA4172-Q1
PRODUCT FOLDER
Click here
Click here
Click here
Table 6. Related Links
SAMPLE & BUY
Click here
Click here
Click here
TECHNICAL
DOCUMENTS
Click here
Click here
Click here
TOOLS &
SOFTWARE
Click here
Click here
Click here
SUPPORT &
COMMUNITY
Click here
Click here
Click here
12.4 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
28
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: OPA172-Q1 OPA2172-Q1 OPA4172-Q1