DS99R124Q_15 Datasheet, PDF (5/31 Pages) Texas Instruments – 5 - 43 MHz 18-bit Color FPD-Link II to FPD-Link Converter

DS99R124Q
www.ti.com
SNLS318D – JANUARY 2010 – REVISED APRIL 2013
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage – V_DDn (1.8V)
Supply Voltage – V_DDTX (3.3V)
Supply Voltage – V_DDIO
LVCMOS I/O Voltage
Receiver Input Voltage
LVDS Output Voltage
Junction Temperature
Storage Temperature
Lead Temperature
(Soldering, 4s)
48L RHS Package
Maximum Power Dissipation Capacity at
25°C
Derate above 25°C
θ_JA
θ_JC
ESD Rating (IEC, powered-up only), R_D =
330Ω, C_S = 150pF
Air Discharge (R_IN+, R_IN−)
Contact Discharge (R_IN+, R_IN−)
ESD Rating (ISO10605), R_D = 330Ω, C_S =
150 & 330pF
Air Discharge (R_IN+, R_IN−)
Contact Discharge (R_IN+, R_IN−)
ESD Rating (ISO10605), R_D = 2kΩ, C_S = 150 Air Discharge (R_IN+, R_IN−)
& 330pF
Contact Discharge (R_IN+, R_IN−)
ESD Rating (HBM)
ESD Rating (CDM)
ESD Rating (MM)
−0.3V to +2.5V
−0.3V to +4.0V
−0.3V to +4.0V
−0.3V to +(VDDIO + 0.3V)
−0.3V to (VDD + 0.3V)
−0.3V to (VDDTX + 0.3V)
+150°C
−65°C to +150°C
+260°C
1/ θ_JA°C/W
27.7 °C/W
3.0 °C/W
≥±30 kV
≥±6 kV
≥±15 kV
≥±8 kV
≥±15 kV
≥±8 kV
≥±8 kV
≥±1.25 kV
≥±250 V
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Recommended Operating Conditions
Min
Nom
Max
Units
Supply Voltage (V_DDn)
LVCMOS Supply Voltage (V_DDIO)
LVCMOS Supply Voltage (V_DDIO)
Operating Free Air Temperature (T_A)
TxCLK Clock Frequency
Supply Noise⁽¹⁾
1.71
1.8
1.89
V
1.71
1.8
1.89
V
3.0
3.3
3.6
V
−40
+25
+105
°C
5
43
MHz
100
mV_P-P
(1) Supply noise testing was done with minimum capacitors on the PCB. A sinusoidal signal is AC coupled to the V_DDn (1.8V) supply with
amplitude = 100 mVp-p measured at the device V_DDn pins. Bit error rate testing of input to the Ser and output of the Des with 10 meter
cable shows no error when the noise frequency on the Ser is less than 750 kHz. The Des on the other hand shows no error when the
noise frequency is less than 400 kHz.
Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: DS99R124Q
Submit Documentation Feedback
5