THS4532_16 Datasheet, PDF (36/58 Pages) Texas Instruments – Ultra Low Power, Rail-to-Rail Output, Fully-Differential Amplifier

THS4532
SLOS829A – FEBRUARY 2013 – REVISED JULY 2015
www.ti.com
9.1.11 Audio On and Off Pop Performance
The THS5432 is tested to show on and off pop performance by connecting a speaker between the differential
outputs and switching on and off the power supply, and also by using the power down function of the THS5432.
Testing was done with and without tones. During these tests no audible pop could be heard.
With no input tone, Figure 84 shows the voltage waveforms when switching power on to the THS5432 and
Figure 85 shows voltage waveforms when turning power off. The transients during power on and off show no
audible pop should be heard.
5
2.5
5
2.5
Power Supply
V_OUT +
4
2
4
V_OUT −
2
V_S = 5 V
V_S = 5 V
3
G = 2 V/V ^1.5
3
G = 2 V/V ^1.5
R_F = 2 kΩ
R_F = 2 kΩ
R_L = 200 Ω
R_L = 200 Ω
2
1
2
1
1
Power Supply 0.5
V_OUT +
V_OUT −
0
0
0
50m
100m
150m
200m
Time (s)
G072
Figure 84. Power Supply Turnon Pop Performance
1
0.5
0
0
0
50m
100m
150m
200m
Time (s)
G073
Figure 85. Power Supply Turnoff Pop Performance
With no input tone, Figure 86 shows the voltage waveforms using the PD pin to enable and disable the
THS5432. The transients during power on and off show no audible pop should be heard.
5
2.5
Power Down
V_OUT +
4
V_OUT −
2
V_S = 5 V
3
G = 2 V/V ^1.5
R_F = 2 kΩ
R_L = 200 Ω
2
1
1
0.5
0
0
0
50m
100m
150m
200m
Time (s)
G074
Figure 86. PD Enable Pop Performance
36
Submit Documentation Feedback
Product Folder Links: THS4532
Copyright © 2013–2015, Texas Instruments Incorporated