English
Language : 

THS4532_16 Datasheet, PDF (34/58 Pages) Texas Instruments – Ultra Low Power, Rail-to-Rail Output, Fully-Differential Amplifier
THS4532
SLOS829A – FEBRUARY 2013 – REVISED JULY 2015
www.ti.com
9
6
3
0
−3
−6
−9
−12
−15
−18
−21
100k
VOUT = 100 mVPP
RF = 2 kΩ
RF = 10 kΩ
RF = 100 kΩ
1M
10M
Frequency (Hz)
100M
G067
Figure 78. THS5432 Frequency Response with Various Gain Setting Resistor Values
9.1.9 Driving Capacitive Loads
The THS5432 is designed for a nominal parasitic capacitive load of 2 pF (differentially). When driving capacitive
loads greater than this, TI recommends using small resisters (RO) in series with the output as close to the device
as possible. Without RO, capacitance on the output interacts with the output impedance of the amplifier causing
phase shift in the loop gain of the amplifier that reduces the phase margin resulting in:
• Peaking in the frequency response.
• Overshoot, undershoot, and ringing in the time domain response with a pulse or square-wave signal.
• May lead to instability or oscillation.
Inserting RO compensates the phase shift and restores the phase margin, but it also limits bandwidth. The circuit
shown in Figure 73 is used to test for best RO versus capacitive loads, CL, with a capacitance placed differential
across the VOUT+ and VOUT- along with 2-kΩ load resistor, and the output is measure with a differential probe.
Figure 79 shows the suggested values of RO versus capacitive loads, CL, and Figure 80 shows the frequency
response with various values. Performance is the same on both 2.7-V and 5-V supply.
200
100
10
VS = 2.7 V
G = 1 V/V
RF = 2 kΩ
RL = 2 kΩ
1
1
10
100
1k 2k
CLOAD (pF)
G068
Figure 79. Recommended Series Output Resistor vs
Capacitive Load for Flat Frequency Response
3
0
VS = 2.7 V
−3
G = 1 V/V
−6
RF = 2 kΩ
RL = 2 kΩ
−9
VOUT = 100 mVpp
−12
−15
−18
−21
100k
CL = 0 pF, RO = 0 Ω
CL = 15 pF, RO = 200 Ω
CL = 39 pF, RO = 100 Ω
CL = 120 pF, RO = 50 Ω
CL = 470 pF, RO = 20 Ω
CL = 1200 pF, RO = 12 Ω
1M
10M
100M
Frequency (Hz)
G069
Figure 80. Frequency Response for Various RO and CL
Values
34
Submit Documentation Feedback
Product Folder Links: THS4532
Copyright © 2013–2015, Texas Instruments Incorporated