THS6042_16 Datasheet, PDF (3/46 Pages) Texas Instruments – 350mA,12V ADSL CPE LINE DRIVERS

THS6042, THS6043
350 mA, ±12 V ADSL CPE LINE DRIVERS
recommended operating conditions
Supply voltage, VCC+ to VCC−
Operating free-air temperature, TA
Dual supply
Single supply
C-suffix
I-suffix
SLOS264G − MARCH 2000 − REVISED DECEMBER 2001
MIN NOM
±5
10
0
−40
MAX
±15
30
70
85
UNIT
V
°C
electrical characteristics over recommended operating free-air temperature range, T_A = 25°C,
V_CC = ±12 V, R_(FEEDBACK) = 750 Ω, R_L = 100 Ω (unless otherwise noted)
dynamic performance
PARAMETER
TEST CONDITIONS
G = 1, RF = 560 Ω
BW
Small-signal bandwidth
(−3 dB)
RL = 25 Ω
RL = 100 Ω
G = 2, RF = 500 Ω
G = 4, RF = 390 Ω
G = 4, RF = 390 Ω
G = 8, RF = 280 Ω
VCC = ±6 V, ±12 V
VCC = ±6 V, ±12 V
SR Slew rate (see Note 2)
RL = 25 Ω
G = 2, RF = 390 Ω,
VO = 5 Vpp
RL = 100 Ω
G = 4, RF = 750 Ω,
VO = 12 Vpp
G = 4, RF = 750 Ω,
VO = 5 Vpp
VCC = ±15 V
VCC = ± 12 V
VCC = ± 6 V
VCC = ±15 V
VCC = ± 12 V
VCC = ± 6 V
NOTE 2: Slew rate is defined from the 25% to the 75% output levels.
noise/distortion performance
PARAMETER
THD
Total harmonic distortion
(single-ended configuration)
(RF = 390 Ω)
Vn
Input voltage noise
+Input
In
Input current noise
−Input
Crosstalk
TEST CONDITIONS
G = 4,
RL = 100 Ω,
VCC = ± 12 V, f = 250 kHz
VO(pp) = 2 V
VO(pp) = 16 V
G = 4,
RL = 25 Ω,
VCC = ±6 V, f = 250 kHz
VCC = ±6 V, ±12 V
VO(pp) = 2 V
VO(pp) = 7 V
f = 10 kHz
VCC = ± 6 V, ±12 V, ± 15 V
f = 250 kHz ,
RF = 430 Ω,
f = 250 kHz ,
RF = 390 Ω,
VCC = ± 6 V, ±12 V,
RL = 100 Ω
VCC = ± 6 V, ±12 V,
RL = 25 Ω
f = 10 kHz
VO = 2 Vpp, G = 4
MIN TYP MAX UNIT
120
95
75
MHz
100
65
1000
900
600
1400
V/µs
1200
600
MIN TYP MAX UNIT
− 79
− 75
dBc
− 72
− 68
2.2
nV/√Hz
2.1
pA/√Hz
11
− 71
dBc
− 65
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3