THS6042_16 Datasheet, PDF (29/46 Pages) Texas Instruments – 350mA,12V ADSL CPE LINE DRIVERS

THS6042, THS6043
350 mA, ±12 V ADSL CPE LINE DRIVERS
SLOS264G − MARCH 2000 − REVISED DECEMBER 2001
APPLICATION INFORMATION
general configurations (continued)
If a multiple pole filter is required, the use of a Sallen-Key filter can work very well with CFB amplifiers. This is
because the filtering elements are not in the negative feedback loop and stability is not compromised. Because
of their high slew-rates and high bandwidths, CFB amplifiers can create very accurate signals and help minimize
distortion. An example is shown in Figure 51.
C1
VI
R1
+
R2
_
C2
RF
RG
R1 = R2 = R
C1 = C2 = C
Q = Peaking Factor
(Butterworth Q = 0.707)
f–3dB
+
1
2pRC
( ) ^{RG =}
RF
1
2− _Q
Figure 51. 2-Pole Low-Pass Sallen-Key Filter
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
29