SRC4382_14 Datasheet, PDF (3/84 Pages) Texas Instruments – Two-Channel, Asynchronous Sample Rate Converter with Integrated Digital Audio Interface Receiver and Transmitter

SRC4382
www.ti.com
SBFS030C – JANUARY 2006 – REVISED SEPTEMBER 2007
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION⁽¹⁾
PRODUCT
SRC4382
PACKAGE
TQFP-48
PACKAGE
DESIGNATOR
OPERATING
TEMPERATURE
RANGE
PFB
–40C to +85C
PACKAGE
MARKING
SRC4382I
ORDERING
NUMBER
SRC4382IPFBT
SRC4382IPFBR
TRANSPORT MEDIA,
QUANTITY
Tape and Reel, 250
Tape and Reel, 2000
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Power Supplies
VDD18
VDD33
VIO
VCC
Digital Input Voltage: Digital Logic
RXCKI, MUTE, CPM, CS, CCLK, CDIN, CDOUT, INT, RST, MCLK, BLS, SYNC, BCKA,
BCKB, LRCKA, LRCKB, SDINA, SDINB
Line Receiver Input Voltage (per pin)
RX1+, RX1–, RX2+, RX2–, RX3+, RX3–, RX4+, RX4–
Input Current (all pins except power and ground)
Ambient Operating Temperature
Storage Temperature
–0.3V to +2.0V
–0.3V to +4.0V
–0.3V to +4.0V
–0.3V to +4.0V
–0.3V to (VIO + 0.3V)
(VDD33 + 0.3) V_PP
10mA
–40C to +85C
–65C to +150C
(1) These limits are stress ratings only. Stresses beyond these limits may result in permanent damage. Extended exposure to absolute
maximum ratings may degrade device reliability. Normal operation or performance at or beyond these limits is not specified or ensured.
Copyright © 2006–2007, Texas Instruments Incorporated
Product Folder Link(s): SRC4382
Submit Documentation Feedback
3