SBAS052 Datasheet, PDF (3/17 Pages) Texas Instruments – Stereo Audio DIGITAL-TO-ANALOG CONVERTER MPEG2/AC-3 COMPATIBLE

Not Recommended For New Designs
PIN CONFIGURATION
TOP VIEW
NC 1
SCKI 2
TEST 3
ML 4
MC 5
MD 6
RSTB 7
ZERO 8
V_OUTR 9
AGND 10
SSOP
20 DGND
19 V_DD
18 NC
17 GND
16 LRCIN
15 DIN
14 BCKIN
13 CAP
12 V_OUTL
11 V_CC
PACKAGE INFORMATION
PRODUCT
PCM1720
PACKAGE
20-Pin SSOP
PACKAGE DRAWING
NUMBER⁽¹⁾
334-1
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix C of Burr-Brown IC Data Book.
ABSOLUTE MAXIMUM RATINGS
Power Supply Voltage ....................................................................... +6.5V
+V_CC to +V_DD Difference ................................................................... ±0.1V
Input Logic Voltage .................................................. –0.3V to (V_DD + 0.3V)
Power Dissipation .......................................................................... 300mW
Operating Temperature Range ......................................... –25°C to +85°C
Storage Temperature ...................................................... –55°C to +125°C
Lead Temperature (soldering, 5s) .................................................. +260°C
Thermal Resistance, θ_JA .............................................................. +70°C/W
PIN ASSIGNMENTS
PIN NAME TYPE FUNCTION
1
NC
—
2
SCKI
IN
3 TEST OUT
4*
ML
IN
5* MC
IN
6* MD
IN
7* RSTB IN
8 ZERO OUT
9
V_OUTR
10 AGND
11
V_CC
12 V_OUTL
13 CAP
14* BCKIN
15* DIN
16* LRCIN
17 GND
18 NC
19
V_DD
OUT
PWR
PWR
OUT
—
IN
IN
IN
PWR
—
PWR
20 DGND PWR
No Connection.
System Clock Input: 256f_S or 384f_S.
Reserved for Factory Use.
Latch Enable for Serial Control Data.
Clock for Serial Control Data.
Data Input for Serial Control.
Reset Input. When this pin is low, the digital
filters and modulators are held in reset.
Zero Data Flag. This pin is low when the data is
continuously zero for more than 65,535 cycles of
BCKIN.
Right Channel Analog Output.
Analog Ground.
Analog Power Supply (+5V).
Left Channel Analog Output.
Common Pin for Analog Output Amplifiers.
Bit Clock for Clocking in the Audio Data.
Serial Audio Data Input.
Left/Right Word Clock. Frequency is equal to fs.
Ground.
No Connection.
Digital Power Supply (+5V). Recommended con-
nection is to the analog power supply.
Digital Ground. Recommended connection is to
the digital ground plane.
* These pins include internal pull-up resistors.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
®
3
PCM1720