DS90CR561_13 Datasheet, PDF (3/14 Pages) Texas Instruments – 18-Bit Color Flat Panel Display (FPD) Link

OBSOLETE
DS90CR561, DS90CR562
www.ti.com
SNOS766B – JULY 1997 – REVISED APRIL 2013
Absolute Maximum Ratings ^(1)(2)(3)
Supply Voltage (V_CC)
CMOS/TTL Input Voltage
CMOS/TTL Ouput Voltage
LVDS Receiver Input Voltage
LVDS Receiver Input Voltage
LVDS Output Short Circuit Duration
Junction Temperature
Storage Temperature Range
Lead Temperature (Soldering, 4 sec.)
Maximum Power Dissipation @ +25°C
DGG0048A (TSSOP) Package:
DS90CR561
DS90CR562
Package Derating:
DS90CR561
DS90CR562
This device does not meet 2000V ESD rating ⁽⁴⁾
Value
−0.3 to +6
−0.3 to (V_CC + 0.3)
−0.3 to (V_CC + 0.3)
−0.3 to (V_CC + 0.3)
−0.3 to (V_CC + 0.3)
continuous
+150
−65 to +150
+260
Unit
V
V
V
V
V
°C
°C
°C
1.98
W
1.89
W
16 mW/°C above +25°C
15 mW/°C above +25°C
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the device should be operated at these limits. “Electrical Characteristics” specify conditions for device operation.
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
unless otherwise specified (except V_OD and ΔV_OD).
(3) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(4) ESD Rating: HBM (1.5 kΩ, 100 pF) PLL V _CC ≥ 1000V All other pins ≥ 2000V EIAJ (0Ω, 200 pF) ≥ 150V
Recommended Operating Conditions
Supply Voltage (V_CC)
Operating Free Air Temperature (T_A)
Receiver Input Range
Supply Noise Voltage (V_CC)
Min
Nom
Max
4.5
5.0
5.5
−10
+25
+70
0
2.4
100
Units
V
°C
V
mV_P-P
Electrical Characteristics⁽¹⁾
Over recommended operating supply and temperature ranges unless otherwise specified
Symbol
Parameter
Conditions
CMOS/TTL DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_OH
High Level Output Voltage
V_OL
Low Level Output Voltage
V_CL
Input Clamp Voltage
I_OH = −0.4 mA
I_OL = 2 mA
I_CL = −18 mA
I_IN
Input Current
I_OS
Output Short Circuit Current
V_IN = V_CC, GND, 2.5V or 0.4V
V_OUT = 0V
(1) Typical values are given for V_CC = 5.0V and T_A = +25°C.
Min Typ⁽ Max Units
1)
2.0
GND
V_CC
V
0.8 V
3.8 4.9
V
0.1 0.3 V
−0.7 −1.5 V
9
±5.1 ±10 μA
−120 mA
Copyright © 1997–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS90CR561 DS90CR562