VCE6467T Datasheet, PDF (276/352 Pages) Texas Instruments – VCE6467T, AVCE6467T Digital Media System-on-Chip

VCE6467T, AVCE6467T
SPRS690 – MARCH 2011
HEX ADDRESS
RANGE
0x01C6 448C
0x01C6 448E
0x01C6 448F
0x01C6 4490
0x01C6 4492
0x01C6 4493
0x01C6 4494
0x01C6 4496
0x01C6 4497
0x01C6 4498
0x01C6 449A
0x01C6 449B
0x01C6 449C
0x01C6 449E
0x01C6 449F
0x01C6 44A0
0x01C6 44A2
0x01C6 44A3
0x01C6 44A4
0x01C6 44A6
www.ti.com
Table 6-86. USB2.0 Registers (continued)
ACRONYM
REGISTER NAME
RXFUNCADDR
Address of the target function that has to be accessed through the associated RX
Endpoint
RXHUBADDR
Address of the hub that has to be accessed through the associated RX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high speed hub
RXHUBPORT
Port of the hub that has to be accessed through the associated RX Endpoint.
This is used only when full speed or low speed device is connected via a USB2.0
high-speed hub.
Target Endpoint Control Registers (Valid Only in Host Mode) - EPTRG2
TXFUNCADDR
Address of the target function that has to be accessed through the associated TX
Endpoint
TXHUBADDR
Address of the hub that has to be accessed through the associated TX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
TXHUBPORT
Port of the hub that has to be accessed through the associated TX Endpoint. This
is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
RXFUNCADDR
Address of the target function that has to be accessed through the associated RX
Endpoint
RXHUBADDR
Address of the hub that has to be accessed through the associated RX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
RXHUBPORT
Port of the hub that has to be accessed through the associated RX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
Target Endpoint Control Registers (Valid Only in Host Mode) - EPTRG3
TXFUNCADDR
Address of the target function that has to be accessed through the associated TX
Endpoint
TXHUBADDR
Address of the hub that has to be accessed through the associated TX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
TXHUBPORT
Port of the hub that has to be accessed through the associated TX Endpoint. This
is used only when full -peed or low-speed device is connected via a USB2.0
high-speed hub.
RXFUNCADDR
Address of the target function that has to be accessed through the associated RX
Endpoint
RXHUBADDR
Address of the hub that has to be accessed through the associated RX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
RXHUBPORT
Port of the hub that has to be accessed through the associated RX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
Target Endpoint Control Registers (Valid Only in Host Mode) - EPTRG4
TXFUNCADDR
Address of the target function that has to be accessed through the associated TX
Endpoint
TXHUBADDR
Address of the hub that has to be accessed through the associated TX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
TXHUBPORT
Port of the hub that has to be accessed through the associated TX Endpoint. This
is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
RXFUNCADDR
Address of the target function that has to be accessed through the associated RX
Endpoint
RXHUBADDR
Address of the hub that has to be accessed through the associated RX Endpoint.
This is used only when full-speed or low-speed device is connected via a USB2.0
high-speed hub.
276 Peripheral Information and Electrical Specifications
Copyright © 2011, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): VCE6467T AVCE6467T