MUX36S08 Datasheet, PDF (25/37 Pages) Texas Instruments – Low-Capacitance, Low-Leakage-Current, Precision, Analog Multiplexers

www.ti.com
MUX36S08, MUX36D04
SBOS705A – JANUARY 2016 – REVISED JANUARY 2015
Feature Description (continued)
9.3.4 Rail-to-Rail Operation
The valid analog signal for the MUX36xxx ranges from V_SS to V_DD. The input signal to the MUX36xxx can swing
from V_SS to V_DD without any significant degradation in performance. The on-resistance of the MUX36xxx varies
with input signal, as shown in Figure 41
250
V_DD = +13.5V ^VDD ^{= +15V}
200
V_SS = -13.5V ^VSS ^{= -15V}
150
100
50
V_DD = +18V V_DD = +16.5V
V_SS = -18V V_SS = -16.5V
0
±20 ±15 ±10 ±5
0
5 10 15 20
Source or Drain Voltage (V)
C00
Figure 41. On-resistance vs Source or Drain Voltage
9.4 Device Functional Modes
When the EN pin of the MUX36xxx is pulled high, one of the switches is closed based on the state of the
address lines. When the EN pin is pulled low, all the switches are in open state irrespective of the state of the
address lines. The EN pin can be connected to V_DD (as high as 36 V).
Copyright © 2016–2015, Texas Instruments Incorporated
Submit Documentation Feedback
25
Product Folder Links: MUX36S08 MUX36D04