MUX36S08 Datasheet, PDF (15/37 Pages) Texas Instruments – Low-Capacitance, Low-Leakage-Current, Precision, Analog Multiplexers

www.ti.com
MUX36S08, MUX36D04
SBOS705A – JANUARY 2016 – REVISED JANUARY 2015
8.2 On-Resistance
The on-resistance of the MUX36xxx is the ohmic resistance across the S and D pins of the device. The on-
resistance varies with input voltage and supply voltage. The symbol R_ON is used to denote on-resistance. The
measurement setup used to measure R_ON is as shown in Figure 26. Voltage (V) and current (I_CH) are measured
using this setup, and R_ON is computed as shown in Equation 1:
R_ON = V / I_CH
(1)
V
S
D
ICH
VS
Figure 26. On-Resistance Measurement Setup
8.3 Off Leakage
There are two types of leakage currents associated with a switch during the off state:
1. Source off-leakage current
2. Drain off-leakage current
Source leakage current is defined as the leakage current flowing into or out of the source pin when the switch is
off. It is denoted by the symbol I_S(OFF).
Drain leakage current is defined as the leakage current flowing into or out of the drain pin when the switch is off.
It is denoted by the symbol I_D(OFF).
The setup used to measure both off-leakage currents is shown in Figure 27
Is (OFF)
S
A
ID (OFF)
D
A
VS
VD
Figure 27. Off-Leakage Measurement Setup
Copyright © 2016–2015, Texas Instruments Incorporated
Submit Documentation Feedback
15
Product Folder Links: MUX36S08 MUX36D04