TCAN1042-Q1_17 Datasheet, PDF (23/40 Pages) Texas Instruments – Automotive Fault Protected CAN Transceiver with CAN FD

www.ti.com
9.4.4 Driver and Receiver Function Tables
TCAN1042-Q1, TCAN1042V-Q1, TCAN1042H-Q1
TCAN1042HV-Q1, TCAN1042G-Q1, TCAN1042GV-Q1
TCAN1042HG-Q1, TCAN1042HGV-Q1
SLLSES9B – FEBRUARY 2016 – REVISED MAY 2017
Table 5. Driver Function Table
DEVICE
All Devices
INPUTS
STB ⁽¹⁾
TXD ^{(1) (2)}
L
L
H or Open
H or Open
X
OUTPUTS
CANH ⁽¹⁾
CANL ⁽¹⁾
H
L
Z
Z
Z
Z
DRIVEN BUS
STATE
Dominant
Recessive
Recessive
(1) H = high level, L = low level, X = irrelevant, Z = common mode (recessive) bias to V_CC / 2. See and
Figure 14 for bus state and common mode bias information.
(2) Devices have an internal pull up to V_CC or V_IO on TXD terminal. If the TXD terminal is open the
terminal will be pulled high and the transmitter will remain in recessive (non-driven) state.
DEVICE MODE
Normal
Table 6. Receiver Function Table
CAN DIFFERENTIAL INPUTS
V_ID = V_CANH – V_CANL
V_ID ≥ V_IT+(MAX)
V_IT-(MIN) < V_ID < V_IT+(MAX)
V_ID ≤ V_IT-(MIN)
Open (V_ID ≈ 0 V)
BUS STATE
Dominant
?
Recessive
Open
RXD
TERMINAL ⁽¹⁾
L ⁽²⁾
? ⁽²⁾
H ⁽²⁾
H
(1) H = high level, L = low level, ? = indeterminate.
(2) See Receiver Electrical Characteristics section for input thresholds.
Copyright © 2016–2017, Texas Instruments Incorporated
Submit Documentation Feedback
23
Product Folder Links: TCAN1042-Q1 TCAN1042V-Q1 TCAN1042H-Q1 TCAN1042HV-Q1 TCAN1042G-Q1
TCAN1042GV-Q1 TCAN1042HG-Q1 TCAN1042HGV-Q1