TCAN1042-Q1_17 Datasheet, PDF (1/40 Pages) Texas Instruments – Automotive Fault Protected CAN Transceiver with CAN FD

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TCAN1042-Q1, TCAN1042V-Q1, TCAN1042H-Q1
TCAN1042HV-Q1, TCAN1042G-Q1, TCAN1042GV-Q1
TCAN1042HG-Q1, TCAN1042HGV-Q1
SLLSES9B – FEBRUARY 2016 – REVISED MAY 2017
TCAN1042-Q1 Automotive Fault Protected CAN Transceiver with CAN FD
1 Features
•1 AEC Q100: Qualified for Automotive Applications
– Device Temperature Grade 1: -40°C to 125°C
Ambient Operating Temperature
– Device HBM Classification Level: ±16 kV
– Device CDM Classification Level ±1500 V
• Meets the ISO 11898-2:2016 and
ISO 11898-5:2007 Physical Layer Standards
• 'Turbo' CAN:
– All Devices Support Classic CAN and 2 Mbps
CAN FD (Flexible Data Rate) and "G" Options
Support 5 Mbps
– Short and Symmetrical Propagation Delay
Times and Fast Loop Times for Enhanced
Timing Margin
– Higher Data Rates in Loaded CAN Networks
• I/O Voltage Range Supports 3.3 V and 5 V MCUs
• Ideal Passive Behavior When Unpowered
– Bus and Logic Terminals are High Impedance
(no load)
– Power Up/Down With Glitch Free Operation
On Bus and RXD Output
• Protection Features
– IEC ESD Protection up to ±15 kV
– Bus Fault Protection: ±58 V (non-H variants)
and ±70 V (H variants)
– Undervoltage Protection on V_CC and V_IO (V
variants only) Supply Terminals
– Driver Dominant Time Out (TXD DTO) - Data
rates down to 10 kbps
– Thermal Shutdown Protection (TSD)
• Receiver Common Mode Input Voltage: ±30 V
• Typical Loop Delay: 110 ns
• Junction Temperatures from –55°C to 150°C
• Available in SOIC(8) Package and Leadless
VSON(8) Package (3.0 mm x 3.0 mm) with
Improved Automated Optical Inspection (AOI)
Capability
2 Applications
• Automotive and Transportation
• All devices support highly loaded CAN networks
• Heavy Machinery ISOBUS Applications –
ISO 11783
• SAE J2284 High-Speed CAN for Automotive
Applications
1
• GMW3122 Dual-Wire CAN Physical Layer
• Meets requirements of SAE J2962, GIFT/ICT,
ISO16845
3 Description
This CAN transceiver family meets the ISO11898-2
(2016) High Speed CAN (Controller Area Network)
physical layer standard. All devices are designed for
use in CAN FD networks up to 2 Mbps (megabits per
second). Devices with part numbers that include the
"G" suffix are designed for data rates up to 5 Mbps,
and versions with the "V" have a secondary power
supply input for I/O level shifting the input pin
thresholds and RXD output level. This family has a
low power standby mode with remote wake request
feature. Additionally, all devices include many
protection features to enhance device and network
robustness.
ORDER NUMBER
TCAN1042x-Q1
Device Information
PACKAGE
BODY SIZE
SOIC (8)
4.90 mm × 3.91 mm
VSON (8)
3.00 mm x 3.00 mm
Functional Block Diagram
NC or VIO
VCC
5
3
VCC or VIO
TXD 1
VCC or VIO
TSD
Dominant
time-out
7 CANH
6 CANL
STB 8
UVP
Mode Select
VCC or VIO
RXD 4 Logic Output
MUX
WUP Monitor
Low Power Receiver
2
GND
Copyright © 2016, Texas Instruments Incorporated
A. Terminal 5 function is device dependent;
NC on devices without the "V" suffix, and
V_IO for I/O level shifting for devices with the
"V" suffix.
B. RXD logic output is driven to V_CC on
devices without the "V" suffix, and V_IO for
devices with the "V" suffix.
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.