LMH6642_16 Datasheet, PDF (21/39 Pages) Texas Instruments – LMH664x Low Power, 130 MHz, 75 mA Rail-to-Rail Output Amplifiers

www.ti.com
8 Detailed Description
LMH6642, LMH6643, LMH6644
SNOS966Q – MAY 2001 – REVISED SEPTEMBER 2014
8.1 Overview
The LMH664X family is based on proprietary VIP10 dielectrically isolated bipolar process. This device family
architecture features the following:
• Complimentary bipolar devices with exceptionally high f_t (∼8 GHz) even under low supply voltage (2.7 V) and
low bias current.
• A class A-B “turn-around” stage with improved noise, offset, and reduced power dissipation compared to
similar speed devices (patent pending).
• Common Emitter push-push output stage capable of 75 mA output current (at 0.5 V from the supply rails)
while consuming only 2.7 mA of total supply current per channel. This architecture allows output to reach
within mV of either supply rail.
• Consistent performance over the entire operating supply voltage range with little variation for the most
important specifications (for example, BW, SR, I_OUT, and so forth)
• Significant power saving (∼40%) compared to competitive devices on the market with similar performance.
8.2 Functional Block Diagram
V+
R
IN+
V+
V+
R
IN-
V-
V-
Figure 54. Input Equivalent Circuit
8.3 Feature Description
The LMH664X family is a drop-in replacement for the AD805X family of high speed Op Amps in most
applications. In addition, the LMH664X will typically save about 40% on power dissipation, due to lower supply
current, when compared to competition. All AD805X family’s specified parameters are included in the list of
LMH664X ensured specifications in order to ensure equal or better level of performance. However, as in most
high performance parts, due to subtleties of applications, it is strongly recommended that the performance of the
part to be evaluated is tested under actual operating conditions to ensure full compliance to all specifications.
8.4 Device Functional Modes
With 3-V supplies and a common mode input voltage range that extends 0.5 V below V^−, the LMH664X find
applications in low voltage/low power applications. Even with 3-V supplies, the −3dB BW (@ A_V = +1) is typically
115 MHz with a tested limit of 80 MHz. Production testing guarantees that process variations will not compromise
speed. High frequency response is exceptionally stable, confining the typical −3dB BW over the industrial
temperature range to ±2.5%.
As seen in Typical Performance Characteristics, the LMH664X output current capability (∼75 mA) is enhanced
compared to AD805X. This enhancement increases the output load range, adding to the LMH664X’s versatility.
Since LMH664X is capable of high output current, device junction temperature should not to exceed the Absolute
Maximum Ratings.
Copyright © 2001–2014, Texas Instruments Incorporated
Submit Documentation Feedback
21
Product Folder Links: LMH6642 LMH6643 LMH6644