|
BQ2205LYPWR Datasheet, PDF (2/14 Pages) Texas Instruments – POWER MONITORING AND SWITCHING CONTROLLER FOR 3.3-V SRAM | |||
|
◁ |
bq2205LY
SLUS581 â FEBRUARY 2004
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
TA
OPERATION
PART NUMBER(1)
SYMBOL
â20°C to 70°C
3.3 V
bq2205LYPW
bq2205LY
(1) The PW package is available taped and reeled. Add an R suffix to the device type (i.e. bq2205LYPWR) to order quantities of 2,000 devices
per reel.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(2)
bq2205LY
UNIT
VCC, (wrt VSS)
â0.3 to 6.0
Input voltage range
BCP, (wrt VSS)
â0.3 to 4.5
V
all other pins, (wrt VSS)
â0.3 to VCC + 0.3
Operating temperature range, TA
â20 to 70
Storage temperature, Tstg
Temperature under bias, TJbias
â55 to 125
°C
â40 to 85
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
300
(2) Stresses beyond those listed under âabsolute maximum ratingsâ may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated under ârecommended operating conditionsâ
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Supply voltage, VCC
Supply voltage from backup cell, VBC
Low-level input voltage, VIL
High-level input voltage, VIH
RST low-level input voltage, VIL
RST high-level input voltage, VIH
Operating temperature range, TA
MIN
3.0
2.0
â0.3
2.2
â0.3
2.2
â20
MAX
3.6
4.0
0.8
VCC + 0.3
0.4
VCC + 0.3
70
UNIT
V
°C
2
www.ti.com
|
▷ |