AM5728 Datasheet, PDF (159/415 Pages) Texas Instruments – AM572x Sitara™ Processors

www.ti.com
AM5728, AM5726
SPRS953A – DECEMBER 2015 – REVISED JUNE 2016
Table 5-1. Absolute Maximum Rating Over Junction Temperature Range (continued)
PARAMETER⁽¹⁾
MIN
MAX UNIT
Core I/Os
–0.3
1.5 V
Analog I/Os (except HDMI)
–0.3
2.0
HDMI I/Os
–0.3
3.5
V_IO (Steady-State)
Input and Output Voltage Ranges
(Steady-State)
I/O 1.35 V
I/O 1.5 V
1.8 V I/Os
–0.3
1.65
–0.3
1.8
–0.3
2.1
3.3 V I/Os (except those powered
by vddshv8)
–0.3
3.8
3.3 V I/Os (powered by vddshv8)
–0.3
3.6
SR
Maximum slew rate, all supplies
10⁵ V/s
V_IO (Transient Overshoot /
Undershoot)
Input and Output Voltage Ranges (Transient Overshoot/Undershoot)
Note: valid for up to 20% of the signal period
0.2*VDD
(2)
V
T_STG
Latch-up I-Test
Latch-up OV-Test
Storage temperature range after soldered onto PC Board
I-test⁽³⁾, All I/Os (if different levels then one line per level)
Over-voltage Test⁽⁴⁾, All supplies (if different levels then one line per level)
(1) See I/Os supplied by this power pin in Table 4-2 Ball Characteristics
–55
+150 °C
–100
100 mA
N/A 1.5*V_SUP
V
PLY MAX
(2) VDD is the voltage on the corresponding power-supply pin(s) for the I/O.
(3) Per JEDEC JESD78 at 125°C with specified I/O pin injection current and clamp voltage of 1.5 times maximum recommended I/O
voltage and negative 0.5 times maximum recommended I/O voltage.
(4) Per JEDEC JESD78 at 125°C.
5.2 ESD Ratings
Table 5-2 presents the Device ESD Ratings requirements.
Table 5-2. ESD Ratings
V_(ESD)
Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC
JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC
specification JESD22-C101⁽²⁾
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
VALUE
±1000
±250
UNIT
V
5.3 Power on Hours (POH) Limits
The information in the section below is provided solely for your convenience and does not extend or
modify the warranty provided under TI’s standard terms and conditions for TI semiconductor products.
NOTE
POH is a function of voltage, temperature and time. Usage at higher voltages and
temperatures will result in a reduction in POH.
Copyright © 2015–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: AM5728 AM5726
Specifications 159