TMS320C6654_15 Datasheet, PDF (140/235 Pages) Texas Instruments – Fixed and Floating-Point Digital Signal Processor

TMS320C6654
SPRS841B – MARCH 2012 – REVISED APRIL 2015
www.ti.com
8.5.2.7 Reset Control Register (RSTCTRL)
This register contains a key that enables writes to the MSB of this register and the RSTCFG Register. The
key value is 0x5A69. A valid key will be stored as 0x000C, any other key value is invalid. When the
RSTCTRL or the RSTCFG is written, the key is invalidated. Every write must be set up with a valid key.
The Software Reset Control Register (RSTCTRL) is shown in Figure 8-14 and described in Table 8-21.
Figure 8-14. Reset Control Register (RSTCTRL)
31
17
16
15
0
Reserved
R-0x0000
SWRST
R/W-0x ⁽¹⁾
KEY
R/W-0x0003
Legend: R = Read only; -n = value after reset;
(1) Writes are conditional based on valid key.
Bit
31-17
16
Field
Reserved
SWRST
15-0 KEY
Table 8-21. Reset Control Register (RSTCTRL) Field Descriptions
Description
Reserved.
Software reset
• 0 = Reset
• 1 = Not reset
Key used to enable writes to RSTCTRL and RSTCFG.
140 Peripheral Information and Electrical Specifications
Copyright © 2012–2015, Texas Instruments Incorporated
Submit Documentation Feedback