TMS320C6748BZWT4 Datasheet, PDF (126/273 Pages) Texas Instruments – TMS320C6748 Fixed- and Floating-Point DSP

TMS320C6748
SPRS590E – JUNE 2009 – REVISED AUGUST 2013
www.ti.com
5.11.3.5 DDR2/mDDR Keep Out Region
The region of the PCB used for the DDR2/mDDR circuitry must be isolated from other signals. The
DDR2/mDDR keep out region is defined for this purpose and is shown in Figure 5-21. The size of this
region varies with the placement and DDR routing. Additional clearances required for the keep out region
are shown in Table 5-28.
A1
DDR2/mDDR
Device
A1
Region should encompass all DDR2/mDDR circuitry and varies
depending on placement. Non-DDR2/mDDR signals should not be
routed on the DDR signal layers within the DDR2/mDDR keep out
region. Non-DDR2/mDDR signals may be routed in the region
provided they are routed on layers separated from DDR2/mDDR
signal layers by a ground layer. No breaks should be allowed in the
reference ground layers in this region. In addition, the 1.8 V power
plane should cover the entire keep out region.
Figure 5-21. DDR2/mDDR Keepout Region
126 Peripheral Information and Electrical Specifications
Copyright © 2009–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320C6748