TM4C123BH6PGE Datasheet, PDF (1243/1333 Pages) Texas Instruments – Tiva TM4C123BH6PGE Microcontroller

Tiva^™ TM4C123BH6PGE Microcontroller
Table 22-2. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Type^a Description
PF1
I/O
TTL
GPIO port F bit 1.
C1o
O
TTL
Analog comparator 1 output.
M1PWM5
O
TTL
Motion Control Module 1 PWM 5. This signal is controlled by
Module 1 PWM Generator 2.
63
PhB0
I
TTL
QEI module 0 phase B.
SSI1Tx
O
TTL
SSI module 1 transmit.
T0CCP1
I/O
TTL
16/32-Bit Timer 0 Capture/Compare/PWM 1.
TRD1
O
TTL
Trace data 1.
U1CTS
I
TTL
UART module 1 Clear To Send modem flow control input signal.
PF2
I/O
TTL
GPIO port F bit 2.
C2o
O
TTL
Analog comparator 2 output.
M0FAULT0
I
TTL
Motion Control Module 0 PWM Fault 0.
M1PWM6
O
TTL
Motion Control Module 1 PWM 6. This signal is controlled by
64
Module 1 PWM Generator 3.
SSI1Clk
I/O
TTL
SSI module 1 clock.
T1CCP0
I/O
TTL
16/32-Bit Timer 1 Capture/Compare/PWM 0.
TRD0
O
TTL
Trace data 0.
U1DCD
I
TTL
UART module 1 Data Carrier Detect modem status input signal.
PF3
I/O
TTL
GPIO port F bit 3.
CAN0Tx
O
TTL
CAN module 0 transmit.
M0FAULT1
I
TTL
Motion Control Module 0 PWM Fault 1.
M1PWM7
O
TTL
Motion Control Module 1 PWM 7. This signal is controlled by
65
Module 1 PWM Generator 3.
SSI1Fss
I/O
TTL
SSI module 1 frame signal.
T1CCP1
I/O
TTL
16/32-Bit Timer 1 Capture/Compare/PWM 1.
TRCLK
O
TTL
Trace clock.
U1DSR
I
TTL
UART module 1 Data Set Ready modem output control line.
66
VDD
-
Power Positive supply for I/O and some logic.
67
GND
-
Power Ground reference for logic and I/O pins.
PN7
I/O
TTL
GPIO port N bit 7.
68
M1PWM7
O
TTL
Motion Control Module 1 PWM 7. This signal is controlled by
Module 1 PWM Generator 3.
WT4CCP1
I/O
TTL
32/64-Bit Wide Timer 4 Capture/Compare/PWM 1.
PN6
I/O
TTL
GPIO port N bit 6.
69
M1PWM6
O
TTL
Motion Control Module 1 PWM 6. This signal is controlled by
Module 1 PWM Generator 3.
WT4CCP0
I/O
TTL
32/64-Bit Wide Timer 4 Capture/Compare/PWM 0.
PN5
I/O
TTL
GPIO port N bit 5.
70
M1PWM5
O
TTL
Motion Control Module 1 PWM 5. This signal is controlled by
Module 1 PWM Generator 2.
WT3CCP1
I/O
TTL
32/64-Bit Wide Timer 3 Capture/Compare/PWM 1.
June 12, 2014
Texas Instruments-Production Data
1243