TM4C123FE6PM Datasheet, PDF (1215/1370 Pages) Texas Instruments – Tiva™ TM4C123FE6PM Microcontroller

Tiva^™ TM4C123FE6PM Microcontroller
Bit/Field
17
16
15:4
3
2
1
Name
INTFAULT1
INTFAULT0
reserved
INTPWM3
INTPWM2
INTPWM1
Type
RO
RO
RO
RO
RO
RO
Reset
0
0
0x000
0
0
0
Description
Interrupt Fault PWM 1
Value Description
0 The fault condition for PWM generator 1 has not been asserted.
1 The fault condition for PWM generator 1 is asserted.
Note:
If the LATCH bit is set in the PWM1CTL register, the
INTFAULT1 bit in this register can be cleared by writing a 1
to the INTFAULT1 bit in the PWMISC register. If the LATCH
bit is 0 in the PWM1CTL register, writing a 1 to the
INTFAULT1 bit in the PWMISC register has no effect.
Interrupt Fault PWM 0
Value Description
0 The fault condition for PWM generator 0 has not been asserted.
1 The fault condition for PWM generator 0 is asserted.
Note:
If the LATCH bit is set in the PWM0CTL register, the
INTFAULT0 bit in this register can be cleared by writing a 1
to the INTFAULT0 bit in the PWMISC register. If the LATCH
bit is 0 in the PWM0CTL register, writing a 1 to the
INTFAULT0 bit in the PWMISC register has no effect.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
PWM3 Interrupt Asserted
Value Description
0 The PWM generator 3 block interrupt has not been asserted.
1 The PWM generator 3 block interrupt is asserted.
The PWM3RIS register shows the source of this interrupt. This bit is
cleared by writing a 1 to the corresponding bit in the PWM3ISC register.
PWM2 Interrupt Asserted
Value Description
0 The PWM generator 2 block interrupt has not been asserted.
1 The PWM generator 2 block interrupt is asserted.
The PWM2RIS register shows the source of this interrupt. This bit is
cleared by writing a 1 to the corresponding bit in the PWM2ISC register.
PWM1 Interrupt Asserted
Value Description
0 The PWM generator 1 block interrupt has not been asserted.
1 The PWM generator 1 block interrupt is asserted.
The PWM1RIS register shows the source of this interrupt. This bit is
cleared by writing a 1 to the corresponding bit in the PWM1ISC register.
June 12, 2014
Texas Instruments-Production Data
1215