English
Language : 

TM4C1294KCPDT Datasheet, PDF (1112/1890 Pages) Texas Instruments – Tiva Microcontroller
Analog-to-Digital Converter (ADC)
Bit/Field
18
17
16
15
14
Name
IE4
END4
D4
TS3
IE3
Type
RW
RW
RW
RW
RW
Reset
0
0
0
0
Description
5th Sample Interrupt Enable
Value Description
0 The raw interrupt is not asserted to the interrupt controller.
1 The raw interrupt signal (INR0 bit) is asserted at the end of the
fifth sample's conversion. If the MASK0 bit in the ADCIM register
is set, the interrupt is promoted to the interrupt controller.
It is legal to have multiple samples within a sequence generate interrupts.
5th Sample is End of Sequence
Value Description
0 Another sample in the sequence is the final sample.
1 The fifth sample is the last sample of the sequence.
It is possible to end the sequence on any sample position. Software
must set an ENDn bit somewhere within the sequence. Samples defined
after the sample containing a set ENDn bit are not requested for
conversion even though the fields may be non-zero.
5th Sample Differential Input Select
Value Description
0 The analog inputs are not differentially sampled.
1 The analog input is differentially sampled. The corresponding
ADCSSMUXn nibble must be set to the pair number "i", where
the paired inputs are "2i and 2i+1".
Because the temperature sensor does not have a differential option,
this bit must not be set when the TS4 bit is set.
4th Sample Temp Sensor Select
Value Description
0 The input pin specified by the ADCSSMUXn register is read
during the fourth sample of the sample sequence.
1 The temperature sensor is read during the fourth sample of the
sample sequence.
0
4th Sample Interrupt Enable
Value Description
0 The raw interrupt is not asserted to the interrupt controller.
1 The raw interrupt signal (INR0 bit) is asserted at the end of the
fourth sample's conversion. If the MASK0 bit in the ADCIM
register is set, the interrupt is promoted to the interrupt controller.
It is legal to have multiple samples within a sequence generate interrupts.
1112
Texas Instruments-Production Data
June 18, 2014