THS4031_16 Datasheet, PDF (1/47 Pages) Texas Instruments – THS403x 100-MHz Low-Noise High-Speed Amplifiers

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
THS4031, THS4032
SLOS224H – JULY 1999 – REVISED JUNE 2016
THS403x 100-MHz Low-Noise High-Speed Amplifiers
1 Features
•1 Ultra-Low 1.6 nV/√Hz Voltage Noise
• High Speed:
– 100-MHz Bandwidth [G = 2 (-1), –3 dB]
– 100-V/μs Slew Rate
• Very Low Distortion
– THD = –72 dBc (f = 1 MHz, R_L = 150 Ω)
– THD = –90 dBc (f = 1 MHz, R_L = 1 kΩ)
• Low 0.5-mV (Typical) Input Offset Voltage
• 90-mA Output Current Drive (Typical)
• Typical Operation from ±5 V to ±15 V
• Available in Standard SOIC and MSOP-
PowerPAD™, Packages
• Evaluation Module Available
2 Applications
• Low-Noise, Wideband Amplifier for Industrial
Applications
• Voltage-Controlled Oscillators
• Active Filters
• Video Amplifiers
• Cable Drivers
3 Description
The THS4031 and THS4032 are ultra-low voltage
noise, high-speed voltage feedback amplifiers that
are ideal for applications requiring low voltage noise,
including communications and imaging. The single
amplifier THS4031 and the dual amplifier THS4032
offer very good AC performance with 100-MHz
bandwidth (G = 2), 100-V/μs slew rate, and 60-ns
settling time (0.1%). The THS4031 and THS4032 are
unity-gain stable with 275-MHz bandwidth. These
amplifiers have a high drive capability of 90 mA and
draw only 8.5-mA supply current per channel. With
–90 dBc of total harmonic distortion (THD) at f = 1
MHz and a very low noise of 1.6 nV/√Hz, the
THS4031 and THS4032 are ideally suited for
applications requiring low distortion and low noise
such as buffering analog-to-digital converters.
PART NUMBER
THS403x
Device Information⁽¹⁾
PACKAGE
BODY SIZE (NOM)
SOIC (8)
4.90 mm × 3.91 mm
MSOP-PowerPAD (8) 3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
High-Performance, Low-Noise Driver for 16-bit
SAR ADCs
49.9 W
-VCC
+4.096V
+VIN = 8Vpp
with
Vincm=0V
+4 V +VIN
1000 W
1000 W
0V
-VIN
8Vpp
-4V
time
+4.096V
8Vpp
1000 W
-VIN = 8Vpp
with
Vincm=0V
1000 W
0.1 mF
4
2
THS4031 ⁶
3
0.1 mF
7
+VCC
49.9 W
-VCC
0.1 mF
4
2
3 ^THS4031
6
0.1 mF
7
+ VCC
12 W
6
+IN
220 pF
C0G
12 W
ADS8422
7 _-IN
Copyright © 2016, Texas Instruments Incorporated
Voltage Noise and Current Noise vs Frequency
20
V_CC = ± 15 V AND ± 5 V
T_A = 25°C
10
V_n
I_n
1
10
100
1k
10 k
100 k
f − Frequency − Hz
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.