MSP430G2230-EP Datasheet, PDF (1/40 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430G2230-EP
www.ti.com
MIXED SIGNAL MICROCONTROLLER
SLAS863 – AUGUST 2012
FEATURES
1
•2 Low Supply Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
– Active Mode: 220 µA at 1 MHz, 2.2 V
– Standby Mode: 0.5 µA
– Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
• Basic Clock Module Configurations:
– Internal Frequencies up to 16 MHz With
Four Calibrated Frequencies to ±1%
– Internal Very-Low-Power Low-Frequency
Oscillator
– 32-kHz Crystal ⁽¹⁾
– External Digital Clock Source
• 16-Bit Timer_A With Two Capture/Compare
Registers
• 10-Bit 200-ksps Analog-to-Digital (A/D)
Converter With Internal Reference, Sample-
and-Hold, and Autoscan
• Universal Serial Interface (USI) Supports SPI
and I2C
• Brownout Detector
(1) Crystal oscillator cannot be operated beyond 105°C
• Serial Onboard Programming, No External
Programming Voltage Needed, Programmable
Code Protection by Security Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
Interface
• Family Members:
– 2kB + 256B Flash Memory
– 128B RAM
• Available in 8-Pin Plastic Packages (D)
• For Complete Module Descriptions, See the
MSP430x2xx Family User's Guide (SLAU144)
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
• Controlled Baseline
• One Assembly/Test Site
• One Fabrication Site
• Available in Extended (–40°C/125°C)
Temperature Range ⁽²⁾
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability
(2) Custom temperature ranges available
DESCRIPTION
The MSP430G2230 is an ultra-low-power microcontroller. The architecture, combined with five low-power modes,
is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2230 is an ultra-low-power mixed signal microcontroller with a built-in 16-bit timer and four I/O
pins. In addition, the MSP430G2230 has a built-in communication capability using synchronous protocols (SPI or
I2C) and a 10-bit A/D converter.
Table 1. Available Options⁽¹⁾
T_A
-40°C to 125°C
PACKAGED DEVICES⁽²⁾
PLASTIC 8-PIN (D)
MSP430G2230QDREP
Tape and reel, 2500
MSP430G2230QDEP
Tube, 75
TOPS-SIDE MARKING
G230EP
VID NUMBER
V62/12620-01XE
V62/12620-01XE-T
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated