MSP430F2132-EP_16 Datasheet, PDF (1/72 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F2132-EP
www.ti.com
SLAS913A – JULY 2013 – REVISED AUGUST 2013
MIXED SIGNAL MICROCONTROLLER
FEATURES
1
• Low Supply Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
– Active Mode: 250 µA at 1 MHz, 2.2 V
– Standby Mode: 0.7 µA
– Off Mode (RAM Retention): 0.1 µA
• Ultra-Fast Wake-Up From Standby Mode in
Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
• Basic Clock Module Configurations
– Internal Frequencies up to 16 MHz With
Four Calibrated Frequencies to ±1%
– Internal Very-Low-Power Low-Frequency
Oscillator
– 32-kHz Crystal ⁽¹⁾
– High-Frequency (HF) Crystal up to 16 MHz
– Resonator
– External Digital Clock Source
– External Resistor
• 16-Bit Timer0_A3 With Three Capture/Compare
Registers
• 16-Bit Timer1_A2 With Two Capture/Compare
Registers
• On-Chip Comparator for Analog Signal
Compare Function or Slope Analog-to-Digital
(A/D) Conversion
• 10-Bit 200-ksps A/D Converter With Internal
Reference, Sample-and-Hold, Autoscan, and
Data Transfer Controller
(1) Crystal oscillator cannot be operated beyond 105°C.
• Universal Serial Communication Interface
– Enhanced UART Supporting Auto-Baudrate
Detection (LIN)
– IrDA Encoder and Decoder
– Synchronous SPI
– I²C™
• Brownout Detector
• Serial Onboard Programming, No External
Programming Voltage Needed, Programmable
Code Protection by Security Fuse
• Bootstrap Loader
• On-Chip Emulation Module
• 8KB + 256B Flash Memory
• 512B RAM
• Available in a 32-Pin QFN (RHB) Package
• For Complete Module Descriptions, See the
MSP430x2xx Family User's Guide, Literature
Number SLAU144
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
• Controlled Baseline
• One Assembly and Test Site
• One Fabrication Site
• Available in Extended (–40°C to 125°C)
Temperature Range ⁽²⁾
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability
(2) Custom temperature ranges available
DESCRIPTION
The MSP430F2132 is an ultra-low-power microcontroller. The architecture, combined with five low-power modes,
is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430F2132 has two built-in 16-bit timers, a fast 10-bit A/D converter with integrated reference and a data
transfer controller (DTC), a comparator, built-in communication capability using the universal serial
communication interface, and up to 24 I/O pins.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated