CC2640R2F-Q1 Datasheet, PDF (1/40 Pages) Texas Instruments – SimpleLink Bluetooth low energy Wireless MCU for Automotive

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
CC2640R2F-Q1
SWRS201 – JANUARY 2017
CC2640R2F-Q1 SimpleLink™ Bluetooth^® low energy Wireless MCU
for Automotive
1 Device Overview
1.1 Features
1
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 2:
– –40°C to +105°C Ambient Operating
Temperature Range
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C3
• Microcontroller
– Powerful ARM^® Cortex^®-M3
– EEMBC CoreMark^® Score: 142
– Up to 48-MHz Clock Speed
– 275KB of Nonvolatile Memory, Including 128KB
of In-System Programmable Flash
– Up to 28KB of System SRAM, of Which 20KB is
Ultra-Low-Leakage SRAM
– 8KB of SRAM for Cache or System RAM Use
– 2-Pin cJTAG and JTAG Debugging
– Supports Over-The-Air Upgrade (OTA)
• Ultra-Low Power Sensor Controller
– Can Run Autonomously From the Rest of the
System
– 16-Bit Architecture
– 2KB of Ultra-Low Leakage SRAM for Code and
Data
• Efficient Code Size Architecture, Placing Drivers,
Bluetooth^® low energy Controller, and Bootloader
in ROM to Make More Flash Available for the
Application
• RoHS-Compliant Automotive Grade Package
– 7-mm × 7-mm RGZ VQFN48 With Wettable
Flanks
• Peripherals
– All Digital Peripheral Pins Can Be Routed to
Any GPIO
– Four General-Purpose Timer Modules
(Eight 16-Bit or Four 32-Bit Timers, PWM Each)
– 12-Bit ADC, 200-ksamples/s, 8-Channel Analog
MUX
– Continuous Time Comparator
– Ultra-Low Power Analog Comparator
– Programmable Current Source
– UART
– 2× SSI (SPI, MICROWIRE, TI)
– I2C
– I2S
1
– Real-Time Clock (RTC)
– AES-128 Security Module
– True Random Number Generator (TRNG)
– 31 GPIOs
– Support for Eight Capacitive-Sensing Buttons
– Integrated Temperature Sensor
• External System
– On-Chip internal DC-DC Converter
– Very Few External Components
– Seamless Integration With the SimpleLink™
CC2590 and CC2592 Range Extenders
• Low Power
– Wide Supply Voltage Range: 1.8 to 3.8 V
– Active-Mode RX: 6.1 mA
– Active-Mode TX at 0 dBm: 6.1 mA
– Active-Mode TX at +5 dBm: 9.1 mA
– Active-Mode MCU: 61 µA/MHz
– Active-Mode MCU: 48.5 CoreMark/mA
– Active-Mode Sensor Controller:
0.4 mA + 8.2 µA/MHz
– Standby: 1.1 µA (RTC Running and RAM/CPU
Retention)
– Shutdown: 100 nA (Wake Up on External
Events)
• RF Section
– 2.4-GHz RF Transceiver Compatible With
Bluetooth low energy (BLE) 4.2 and 5
Specifications
– Excellent Receiver Sensitivity (–96 dBm for
Bluetooth low energy 1 Mbps), Selectivity, and
Blocking Performance
– Programmable Output Power up to +5 dBm
– Link budget of 101 dB for Bluetooth low energy
1 Mbps
– Suitable for Systems Targeting Compliance With
Worldwide Radio Frequency Regulations
– ETSI EN 300 328 (Europe)
– EN 300 440 Class 2 (Europe)
– FCC CFR47 Part 15 (US)
– ARIB STD-T66 (Japan)
• Tools and Development Environment
– Full-Feature Development Kits
– Packet Sniffer PC Software
– Sensor Controller Studio
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for pre-production products; subject to
change without notice.