TIBPAL22V10-7C Datasheet, PDF (8/17 Pages) Texas Instruments – HIGH-PERFORMANCE IMPACT-X E PROGRAMMABLE ARRAY LOGIC CIRCUITS

TIBPAL22V10-7C
HIGH-PERFORMANCE IMPACT-X ™ PROGRAMMABLE ARRAY LOGIC CIRCUITS
SRPS014D – D3520, AUGUST 1990 – REVISED NOVEMBER 1995
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V_CC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage range (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –1.2 V to V_CC +0.5 V
Voltage range applied to disabled output (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to V_CC +0.5 V
Operating free-air temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 75°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
NOTE 1: These ratings apply except for programming pins during a programming cycle or during a preload cycle.
recommended operating conditions
MIN NOM MAX UNIT
VCC
VIH
VIL
IOH
IOL
tw
Supply voltage
High-level input voltage (see Note 2)
Low-level input voltage (see Note 2)
High-level output current
Low-level output current
Pulse duration
Clock high or low
Asynchronous reset high or low
4.75
5 5.25 V
2
5.5 V
0.8 V
– 3.2 mA
16 mA
4
6
ns
Input
5.5
Feedback
5.5
tsu
Setup time before clock↑
Synchronous preset (active)
8
ns
Synchronous preset (inactive)
8
Asynchronous reset (inactive)
6
th
Hold time, input, set, or feedback after clock↑
TA
Operating free-air temperature
0
ns
0
75 °C
NOTE 2: These are absolute voltage levels with respect to the ground terminal of the device and includes all overshoots due to system and/or
tester noise. Testing these parameters should not be attempted without suitable equipment.
8
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265