THS4051 Datasheet, PDF (8/30 Pages) Texas Instruments – 70-MHz HIGH-SPEED AMPLIFIERS

THS4051, THS4052
70-MHz HIGH-SPEED AMPLIFIERS
SLOS238C– MAY 1999 – REVISED MAY 2000
electrical characteristics at T_A = full range, V_CC = ±15 V, R_L = 1 kΩ (unless otherwise noted)
(continued)
output characteristics
PARAMETER
TEST CONDITIONS†
THS4051M
UNIT
MIN TYP MAX
VO
Output voltage swing
VCC = ±15 V
RL = 250 Ω
±12 ±13
V
VCC = ±5 V
RL = 150 Ω
±3.2 ±3.5
VCC = ±15 V
VCC = ±5 V
RL = 1 kΩ
±13 ±13.6
±3.5 ±3.8
V
VCC = ±15 V,
TA = 25°C
80 100
IO
Output current‡
VCC = ±15 V,
TA = full range
RL = 20 Ω
70
mA
ISC
Short-circuit current‡
VCC = ±5 V
VCC = ±15 V
50
75
150
mA
RO
Output resistance
Open loop
13
Ω
† _{Full range = –55°C to 125°C for the THS4051M.}
‡ _{Observe power dissipation ratings to keep the junction temperature below the absolute maximum rating when the output is heavily loaded or}
shorted. See the absolute maximum ratings section of this data sheet for more information.
power supply
PARAMETER
TEST CONDITIONS†
VCC Supply voltage operating range
Dual supply
Single supply
ICC Supply current (per amplifier)
VCC = ±15 V
VCC = ±5 V
PSRR Power supply rejection ratio
VCC = ±5 V or ±15 V
† _{Full range = –55°C to 125°C for the THS4051M.}
TA = 25°C
TA = full range
TA = 25°C
TA = full range
TA = full range
THS4051M
MIN TYP MAX
±4.5
±16.5
9
33
8.5 10.5
11.5
7.5 9.5
10.5
70
84
UNIT
V
mA
dB
8
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265