THS4051 Datasheet, PDF (1/30 Pages) Texas Instruments – 70-MHz HIGH-SPEED AMPLIFIERS

D High Speed
– 70 MHz Bandwidth (G = 1, –3 dB)
– 240 V/µs Slew Rate
– 60-ns Settling Time (0.1%)
D High Output Drive, I_O = 100 mA (typ)
D Excellent Video Performance
– 0.1 dB Bandwidth of 30 MHz (G = 1)
– 0.01% Differential Gain
– 0.01° Differential Phase
D Very Low Distortion
– THD = –82 dBc (f = 1 MHz, R_L = 150 Ω)
– THD = –89 dBc (f = 1 MHz, R_L = 1 kΩ)
D Wide Range of Power Supplies
– V_CC = ±5 V to ±15 V
D Available in Standard SOIC, MSOP
PowerPAD™, JG or FK Package
D Evaluation Module Available
description
The THS4051 and THS4052 are general-pur-
pose, single/dual, high-speed voltage feedback
amplifiers ideal for a wide range of applications
including video, communication, and imaging.
The devices offer very good ac performance with
70-MHz bandwidth, 240-V/µs slew rate, and
60-ns settling time (0.1%). The THS4051/2 are
stable at all gains for both inverting and non-
inverting configurations. These amplifiers have a
high output drive capability of 100 mA and draw
only 8.5-mA supply current per channel. Excellent
professional video results can be obtained with
the low differential gain/phase errors of 0.01%/
0.01° and wide 0.1 dB flatness to 30 MHz. For
applications requiring low distortion, the
THS4051/2 is ideally suited with total harmonic
distortion of –82 dBc at 1 MHz.
DEVICE
THS4011/2
THS4031/2
THS4081/2
RELATED DEVICES
DESCRIPTION
290-MHz Low Distortion High-Speed Amplifiers
100-MHz Low Noise High-Speed Amplifiers
175-MHz Low Power High-Speed Amplifiers
THS4051, THS4052
70-MHz HIGH-SPEED AMPLIFIERS
SLOS238C– MAY 1999 – REVISED MAY 2000
THS4051
D, DGN, AND JG PACKAGE
(TOP VIEW)
NULL
1
8 NULL
IN –
2
7
V_CC+
IN +
3
6 OUT
V_CC–
4
5
NC
NC – No internal connection
THS4052
D AND DGN† PACKAGE
(TOP VIEW)
1OUT
1
8
V_CC+
1IN –
2
7
2OUT
1IN +
3
6
2IN–
–V_CC
4
5
2IN+
Cross Section View Showing
PowerPAD™ Option (DGN)
† _{This device is in the Product Preview stage of development.}
Please contact your local TI sales office for availability.
THS4051
FK PACKAGE
(TOP VIEW)
3 2 1 20 19
NC ₄
18 ^NC
IN– ₅
17 ^VCC+
NC ₆
16 ^NC
IN+ ₇
15 ^OUT
NC ₈
14 ^NC
9 10 11 12 13
CAUTION: The THS4051 and THS4052 provide ESD protection circuitry. However, permanent damage can still occur if this device
is subjected to high-energy electrostatic discharges. Proper ESD precautions are recommended to avoid any performance
degradation or loss of functionality.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2000, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1