THS4051 Datasheet, PDF (16/30 Pages) Texas Instruments – 70-MHz HIGH-SPEED AMPLIFIERS

THS4051, THS4052
70-MHz HIGH-SPEED AMPLIFIERS
SLOS238C– MAY 1999 – REVISED MAY 2000
APPLICATION INFORMATION
noise calculations and noise figure (continued)
This brings up another noise measurement usually preferred in RF applications, the noise figure (NF). Noise
figure is a measure of noise degradation caused by the amplifier. The value of the source resistance must be
defined and is typically 50 Ω in RF applications.
+ _ȧȱ ^ȳȧ NF
10log
eni ²
2
Ȳ^{ǒ Ǔ} ȴ ^eRs
Because the dominant noise components are generally the source resistance and the internal amplifier noise
voltage, we can approximate noise figure as:
ȧȧȧȧȱȲ ^{ȧȡȢǒ Ǔ ǒ Ǔ ȧȣȤȳȴȧȧȧȧ} _{+ ) NF 10log 1}
) ) ²
en
IN
4 kTRS
2
RS
Figure 44 shows the noise figure graph for the THS405x.
NOISE FIGURE
vs
SOURCE RESISTANCE
40
35 ^{f = 10 kHz}
TA = 25°C
30
25
20
15
10
5
0
10
100
1k
10k
Source Resistance - Ω
100k
Figure 44. Noise Figure vs Source Resistance
16
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265