THS4011 Datasheet, PDF (8/30 Pages) Texas Instruments – 290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

THS4011, THS4012
290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS
SLOS216B – JUNE 1999 – FEBRUARY 2000
electrical characteristics, V_CC = ±15 V, R_L = 150 Ω, T_A = 25°C, (unless otherwise noted)
dynamic performance
PARAMETER
TEST CONDITIONS†
Unity-gain bandwidth
Closed loop,
RL = 1 kΩ
Bandwidth for 0.1 dB flatness
BW
Gain = 1
Full power bandwidth (see Note 1)
SR
Slew rate
VCC = ±15 V, RL = 150 Ω,
VCC = ±5 V, RL = 150 Ω,
VCC = ±15 V, RL = 1 kΩ
Settling time to 0.1%
ts
Settling time to 0.01%
VI = –2.5 V to 2.5 V, Gain = –1
VI = –2.5 V to 2.5 V, Gain = –1
† _{Full range = –55°C to 125°C for the M suffix.}
*This parameter is not tested.
NOTE 1: Full pwer bandwidth = slew rate/2π V(PP).
noise/distortion performance
VCC = ±15 V
VCC = ±15 V
VCC = ±5 V
VCC = ±2.5 V
VO(PP) = 20 V
VO(PP) = 20 V
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
PARAMETER
TEST CONDITIONS†
THD
Vn
In
Total harmonic distortion
Input voltage noise
Input current noise
Differential gain error
VCC = ±15 V,
VO(PP) = 1 V
VCC = ±5 V or ±15 V,
VCC = ±5 V or ±15 V,
Gain = 2,
RL = 150 Ω,
NTSC
Differential phase error
Gain = 2,
RL = 150 Ω,
NTSC
† _{Full range = –55°C to 125°C for the M suffix.}
fc = 1 MHz,
f = 10 kHz
f = 10 kHz
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
THS4011M
MIN TYP MAX
*160 200
70
35
30
2.5
8
*300 400
37
35
90
70
UNIT
MHz
MHz
MHz
V/µs
ns
ns
THS4011M
UNIT
MIN TYP MAX
– 80
dBc
7.5
1
0.006
0.001
0.01°
0.002°
nV/√Hz
pA/√Hz
%
8
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265