THS4011 Datasheet, PDF (5/30 Pages) Texas Instruments – 290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

THS4011, THS4012
290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS
SLOS216B – JUNE 1999 – FEBRUARY 2000
electrical characteristics, V_CC = ±15 V, R_L = 150 Ω, T_A = 25°C, (unless otherwise noted)
dynamic performance
PARAMETER
TEST CONDITIONS†
Unity-gain bandwidth (–3 dB)
Gain = 1
BW Bandwidth for 0.1 dB flatness
Full power bandwidth (see Note 2)
SR
Slew rate
Gain = 1
VCC = ±15 V, RL = 150 Ω
VCC = ±5 V, RL = 150 Ω,
Gain = –1, RL = 150 Ω
Settling time to 0.1%
ts
Settling time to 0.01%
VI = –2.5 V to 2.5 V, Gain = –1
VI = –2.5 V to 2.5 V, Gain = –1
† _{Full range = 0°C to 70°C for the C suffix and – 40°C to 85°C for the I suffix.}
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
VO(PP) = 20 V,
VO(PP) = 5 V,
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
THS4011C/I,
THS4012C/I
MIN TYP MAX
290
270
70
35
4.9
16
310
260
37
35
90
70
UNIT
MHz
MHz
MHz
V/µs
ns
ns
noise/distortion performance
PARAMETER
TEST CONDITIONS†
THD
Vn
In
Total harmonic distortion
Input voltage noise
Input current noise
Differential gain error
VCC = ±15 V,
VO(PP) = 2 V
VCC = ±5 V or ±15 V,
VCC = ±5 V or ±15 V,
Gain = 2,
RL = 150 Ω,
NTSC
Gain = 2,
Differential phase error
RL = 150 Ω,
NTSC
† _{Full range = 0°C to 70°C for the C suffix and – 40°C to 85°C for the I suffix.}
fc = 1 MHz,
f = 10 kHz
f = 10 kHz
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
THS4011C/I,
THS4012C/I
MIN TYP MAX
UNIT
– 80
dBc
7.5
1
0.01%
0.01%
0.01°
0.001°
nV/√Hz
pA/√Hz
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
5