THS4011 Datasheet, PDF (4/30 Pages) Texas Instruments – 290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

THS4011, THS4012
290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS
SLOS216B – JUNE 1999 – FEBRUARY 2000
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)^†
Supply voltage, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±16.5 V
Input voltage, V_I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±V_CC
Output current, I_O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 mA
Differential input voltage, V_ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±4 V
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Maximum junction temperature, T_J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Operating free-air temperature, T_A, THS401xC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
THS401xI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C
THS4011M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to 125°C
Storage temperature, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
Lead temperature, 1,6 mm (1/16 inch) from case for 10 seconds, D, DGN package . . . . . . . . . . . . . . . 300°C
Lead temperature, 1,6 mm (1/16 inch) from case for 60 seconds, JG package . . . . . . . . . . . . . . . . . . . 300°C
Case temperature for 60 seconds, FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
DISSIPATION RATING TABLE
PACKAGE
D
DGN‡
θ_JA
(°C/W)
167†
58.4
θ_JC
(°C/W)
38.3
4.7
TA = 25°C
POWER RATING
740 mW
2.14 W
JG
119
28
1050 mW
FK
87.7
20
1375 mW
† _{This data was taken using the JEDEC standard Low-K test PCB. For the JEDEC Proposed}
High-K test PCB, the θ_JA is 95°C/W with a power rating at TA = 25°C of 1.32 W.
‡ _{This data was taken using 2 oz. trace and copper pad that is soldered directly to a 3 in. × 3 in.}
PC. For further information, refer to Application Information section of this data sheet.
recommended operating conditions
Supply voltage, VCC
Operating free-air temperature, TA
Split supply
Single supply
C suffix
I suffix
M suffix
MIN NOM MAX UNIT
±4.5
±16
V
9
32
0
70
–40
85 °C
–55
125
4
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265