THS6002 Datasheet, PDF (4/40 Pages) Texas Instruments – DUAL DIFFERENTIAL LINE DRIVERS AND RECEIVERS

THS6002
DUAL DIFFERENTIAL LINE DRIVERS AND RECEIVERS
SLOS202D– JANUARY 1998– REVISED JULY 1999
DRIVER
electrical characteristics, V_CC = ±15 V, R_L = 25 Ω, R_F = 1 kΩ, T_A = 25°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS†
MIN TYP MAX UNIT
VCC Power supply operating range
Split supply
Single supply
±4.5
±16.5
V
9
33
VO
Output voltage swing
Single ended
RL = 25 Ω
Differential
RL = 50 Ω
3
3.2
VCC = ± 5 V
to
to
– 2.8
–3
V
11.8 12.5
VCC = ± 15 V
to
to
–11.5 –12.2
6
6.4
VCC = ± 5 V
to
to
– 5.6
–6
V
23.6
25
VCC = ± 15 V
to
to
– 23 – 24.4
VICR Common-mode input voltage range
VIO
Input offset voltage
Input offset voltage drift
Differential input offset voltage
Differential input offset voltage drift
Negative
IIB
Input bias current
Positive
Differential
IO
Output current (see Note 2)
IOS
Short-circuit output current (see Note 2)
Open loop transresistance
Common-mode rejection ratio
CMRR
Differential common-mode rejection ratio
VCC = ± 5 V
VCC = ± 15 V
VCC = ± 5 V or ± 15 V
VCC = ± 5 V or ± 15 V,
VCC = ± 5 V or ± 15 V
VCC = ± 5 V or ± 15 V,
VCC = ± 5 V or ± 15 V
VCC = ± 5 V,
VCC = ± 15 V,
TA = 25°C
TA = full range
TA = full range
TA = 25°C
TA = full range
TA = full range
TA = 25°C
TA = full range
TA = 25°C
TA = full range
TA = 25°C
TA = full range
RL = 5 Ω
RL = 25 Ω
VCC = ± 5 V
VCC = ± 15 V
VCC = ± 5 V or ± 15 V, TA = full range
± 3.6
± 13.4
± 3.7
± 13.5
2
1.5
3
4
1.5
500
400 500
800
1.5
5
62
70
100
V
5
mV
7
20 µV/°C
4
mV
5
10 µV/°C
9
µA
12
10
µA
12
8
µA
11
mA
mA
MΩ
dB
Crosstalk
Driver to driver VI = 200 mV,
f = 1 MHz
– 62
dB
† _{Full range is 0°C to 70°C for the THS6002C and – 40°C to 85°C for the THS6002I.}
NOTE 2: A heat sink is required to keep the junction temperature below absolute maximum when an output is heavily loaded or shorted. See
absolute maximum ratings and Thermal Information section.
4
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265