THS6002 Datasheet, PDF (1/40 Pages) Texas Instruments – DUAL DIFFERENTIAL LINE DRIVERS AND RECEIVERS

THS6002
DUAL DIFFERENTIAL LINE DRIVERS AND RECEIVERS
D ADSL Differential Line Driver and Receiver
D Driver Features
– 140 MHz Bandwidth (–3dB) With
25-Ω Load
– 315 MHz Bandwidth (–3dB) With
100-Ω Load
– 1000 V/µs Slew Rate, G = 2
– 400 mA Output Current Minimum Into
25-Ω Load
– –72 dB 3rd Order Harmonic Distortion at
f = 1 MHz, 25-Ω Load, and 20 V_O(PP)
D Receiver Features
– 330 MHz Bandwidth (–3dB)
– 900 V/µs Slew Rate at G = 2
– – 76 dB 3rd Order Harmonic Distortion at
f = 1 MHz, 150-Ω Load, and 20 V_O(PP)
D Wide Supply Range ± 4.5 V to ±16 V
D Available in the PowerPAD™ Package
D Improved Replacement for AD816 or
EL1501
D Evaluation Module Available
V_CC –
D1 OUT
V_CC+
D1 IN+
D1 IN–
R1 IN–
R1 IN+
V_CC+
R1 OUT
V_CC –
SLOS202D– JANUARY 1998– REVISED JULY 1999
DWP PACKAGE
(TOP VIEW)
1
20
V_CC –
2
19
D2 OUT
3
18
V_CC+
4
17
D2 IN+
5
16
D2 IN–
6
15
R2 IN–
7
14
R2 IN+
8
13
V_CC+
9
12
R2 OUT
10
11
V_CC –
Cross Section View Showing PowerPAD
description
The THS6002 contains two high-current, high-speed drivers and two high-speed receivers. These drivers and
receivers can be configured differentially for driving and receiving signals over low-impedance lines. The
THS6002 is ideally suited for asymmetrical digital subscriber line (ADSL) applications where it supports the
high-peak voltage and current requirements of that application. Both the drivers and the receivers are current
feedback amplifiers designed for the high slew rates necessary to support low total harmonic distortion (THD)
in ADSL applications. Separate power supply connections for each driver are provided to minimize crosstalk.
HIGH-SPEED xDSL LINE DRIVER/RECEIVER FAMILY
DEVICE
DRIVER RECEIVER 5 V
±5 V ±15 V
BW
(MHz)
SR
(V/µs)
THD
f = 1 MHz
(dB)
IO
(mA)
Vn
(nV/√Hz)
THS6002
•
THS6012
•
THS6022
•
THS6062
THS7002
•
•
•
140 1000
–62
500
1.7
•
•
140 1300
–65
500
1.7
•
•
210 1900
–66
250
1.7
•
••
•
100
100
–72
90
1.6
•
••
70
100
–84
25
2.0
CAUTION: The THS6002 provides ESD protection circuitry. However, permanent damage can still occur if this device is subjected
to high-energy electrostatic discharges. Proper ESD precautions are recommended to avoid any performance degradation or loss
of functionality.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1999, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1