MSP430F543X_1 Datasheet, PDF (38/90 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F543x, MSP430F541x
MSP430F543xA, MSP430F541xA
SLAS612 – SEPTEMBER 2008.......................................................................................................................................................................................... www.ti.com
Electrical Characteristics
Active Mode Supply Current Into V_CC Excluding External Current
over recommended operating free-air temperature (unless otherwise noted)^(1)(2)(3)
PARAMETER
I_{AM, 1MHz}
I_{AM, 4MHz}
I_{AM, 8MHz}
I_{AM, 16MHz}
I_{AM, 25MHz}
A versions only
TEST CONDITIONS
PMMCOREVx = 0,
V_CC = 3 V
A versions only
f_DCO = f_MCLK = f_SMCLK = 1 MHz,
f_ACLK = 32768 Hz
Program executes in flash,
XTS = 0, CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
PMMCOREVx = 1,
V_CC = 3 V
A versions only
PMMCOREVx = 2,
V_CC = 3 V
A versions only
PMMCOREVx = 2,
V_CC = 3 V
PMMCOREVx = 0,
V_CC = 3 V
A versions only
f_DCO = f_MCLK = f_SMCLK = 4 MHz,
f_ACLK = 32768 Hz
Program executes in flash,
XTS = 0, CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
PMMCOREVx = 1,
V_CC = 3 V
A versions only
PMMCOREVx = 2,
V_CC = 3 V
A versions only
PMMCOREVx = 2,
V_CC = 3 V
PMMCOREVx = 0,
V_CC = 3 V
A versions only
f_DCO = f_MCLK = f_SMCLK = 8 MHz,
f_ACLK = 32768 Hz
Program executes in flash,
XTS = 0, CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
PMMCOREVx = 1,
V_CC = 3 V
A versions only
PMMCOREVx = 2,
V_CC = 3 V
A versions only
f_DCO = f_MCLK = f_SMCLK = 16 MHz,
f_ACLK = 32768 Hz
Program executes in flash,
XTS = 0, CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
f_DCO = f_MCLK = f_SMCLK = 25 MHz,
f_ACLK = 32768 Hz
Program executes in flash,
XTS = 0, CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
PMMCOREVx = 2,
V_CC = 3 V
PMMCOREVx = 1,
V_CC = 3 V
A versions only
PMMCOREVx = 2,
V_CC = 3 V
A versions only
PMMCOREVx = 2,
V_CC = 3 V
PMMCOREVx = 2,
V_CC = 3 V
A versions only
T_A
–40°C to 85°C
–40°C to 85°C
–40°C to 85°C
–40°C to 85°C
–40°C to 85°C
MIN TYP MAX UNIT
0.22
0.25
mA
0.28
0.37 0.45
0.70
0.80
mA
0.90
1.27 1.47
1.32
1.55
mA
1.75
2.50 2.84
3.00
3.40
mA
5.00 5.56
5.65
mA
(1) All inputs are tied to 0 V or to V_CC. Outputs do not source or sink any current.
(2) The currents are characterized with a Micro Crystal CC4V-T1A SMD crystal with a load capacitance of 9 pF. The internal and external
load capacitance are chosen to closely match the required 9 pF.
(3) Non-A versions characterized with program executing worst case JMP $. A-versions characterized with program executing typical data
processing.
38
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated