THS8083A Datasheet, PDF (36/64 Pages) Texas Instruments – TRIPLE 8 BIT 80 MSPS 3.3V VIDEO AND GRAPHICS

CLP2_EN: Enables/disables clamping on channel 2
1: enable (default)
0: disable
CLP2_RG: Sets the clamp range for channel 2
1: middle range
0: bottom range (default)
CLP3_EN: Enables/disables clamping on channel 3
1: enable (default)
0: disable
CLP3_RG: Sets the clamp range for channel 3
1: middle range
0: bottom range (default)
3.2.28 Register Name: CLP_START_0
Subaddress: 21 (R/W)
MSB
LSB
CLP_START7 CLP_START6 CLP_START5 CLP_START4 CLP_START3 CLP_START2 CLP_START1 CLP_START0
CLP_START[7..0]:
CLP_START[11..0] sets the pixel count value that defines the start of the internal clamping pulse. If external
clamping is selected (via CLPSEL) this value has no meaning.
Default: 0x2
3.2.29 Register Name: CLP_START_1
Subaddress: 22 (R/W)
MSB
LSB
X
X
X
X
CLP_START11 CLP_START10 CLP_START9 CLP_START8
CLP_START[11..8]:
See register CLP_START_0
Default: 0x00
3.2.30 Register Name: CLP_STOP_0
Subaddress: 23 (R/W)
MSB
CLP_STOP7
CLP_STOP6 CLP_STOP5 CLP_STOP4 CLP_STOP3 CLP_STOP2 CLP_STOP1
LSB
CLP_STOP0
CLP_STOP[7..0]:
CLP_STOP[11..0] sets the pixel count value that defines the end of the internal clamping pulse. If external
clamping is selected (via CLPSEL) this value has no meaning.
Default: 0x40 = 64
3.2.31 Register Name: CLP_STOP_1
Subaddress: 24 (R/W)
MSB
LSB
X
X
X
X
CLP_STOP11 CLP_STOP10 CLP_STOP9
CLP_STOP8
CLP_STOP[11..8]:
See register CLP_STOP_0
Default: 0x00
NOTE: A setting of about 62 clamp clock cycles is sufficient to assure enough clamp timing (>500 ns) at worst case
(=highest clock frequency).
3–12