MSP430F23X Datasheet, PDF (33/93 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

www.ti.com
MSP430F23x
MSP430F24x(1)
MSP430F2410
SLAS547F – JUNE 2007 – REVISED APRIL 2011
Low-Power-Mode Supply Currents (Into V_CC ) Excluding External Current ⁽¹⁾⁽²⁾
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
I_LPM0,1MHz
Low-power mode 0
(LPM0) current⁽³⁾
TEST CONDITIONS
f_MCLK = 0 MHz,
f_SMCLK = f_DCO = 1 MHz,
f_ACLK = 32768 Hz,
BCSCTL1 = CALBC1_1MHZ,
DCOCTL = CALDCO_1MHZ,
CPUOFF = 1, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
T_A
-40°C to 85°C
105°C
V_CC
2.2 V
3V
MIN TYP
60
63
75
80
I_LPM0,100kHz
Low-power mode 0
(LPM0) current⁽³⁾
f_MCLK = 0 MHz,
f_SMCLK = f_{DCO(0, 0)} ≈ 100 kHz,
f_ACLK = 0 Hz,
RSELx = 0, DCOx = 0,
-40°C to 85°C
2.2 V
33
36
36
CPUOFF = 1, SCG0 = 0, SCG1 = 0,
105°C
3V
OSCOFF = 1
40
I_LPM2
Low-power mode 2
(LPM2) current⁽⁴⁾
f_MCLK = f_SMCLK = 0 MHz,
f_DCO = 1 MHz,
f_ACLK = 32768 Hz,
BCSCTL1 = CALBC1_1MHZ,
DCOCTL = CALDCO_1MHZ,
CPUOFF = 1, SCG0 = 0, SCG1 = 1,
-40°C to 85°C
105°C
-40°C to 85°C
105°C
2.2 V
3V
20
25
23
28
OSCOFF = 0
-40°C
0.8
25°C
0.9
2.2 V
85°C
2.4
I_LPM3,LFXT1
Low-power mode 3
(LPM3) current⁽⁴⁾
f_DCO = f_MCLK = f_SMCLK = 0 MHz,
f_ACLK = 32768 Hz,
CPUOFF = 1, SCG0 = 1, SCG1 = 1,
105°C
-40°C
6
0.9
OSCOFF = 0
25°C
1
3V
85°C
3.9
105°C
10
-40°C
0.3
25°C
0.3
2.2 V
f_DCO = f_MCLK = f_SMCLK = 0 MHz,
85°C
1.8
I_LPM3,VLO
Low-power mode 3
current, (LPM3)⁽⁴⁾
f_ACLK from internal LF oscillator
(VLO),
CPUOFF = 1, SCG0 = 1, SCG1 = 1,
105°C
-40°C
5.5
0.4
OSCOFF = 0
25°C
0.4
3V
85°C
2
105°C
9
-40°C
0.1
I_LPM4
Low-power mode 4
(LPM4) current⁽⁵⁾
f_DCO = f_MCLK = f_SMCLK = 0 MHz,
f_ACLK = 0 Hz,
CPUOFF = 1, SCG0 = 1, SCG1 = 1,
25°C
85°C
2.2 V/3 V
0.1
1.6
OSCOFF = 1
105°C
6.5
MAX
65
72
90
UNIT
µA
95
38
43
42 ^µA
47
25
30
30 µA
35
1.2
1.3
3
13
µA
1.3
1.4
4.3
15
0.9
0.9
2.4
13
µA
1
1
3
15
0.5
0.5
µA
2.5
13
(1) All inputs are tied to 0 V or V_CC . Outputs do not source or sink any current.
(2) The currents are characterized with a Micro Crystal CC4V-T1A SMD crystal with a load capacitance of 9 pF. The internal and external
load capacitance is chosen to closely match the required 9 pF.
(3) Current for Brownout and WDT+ is included. The WDT+ is clocked by SMCLK.
(4) Current for Brownout and WDT+ is included. The WDT+ is clocked by ACLK.
(5) Current for Brownout is included.
Copyright © 2007–2011, Texas Instruments Incorporated
33