ADS5263_13 Datasheet, PDF (27/82 Pages) Texas Instruments – Quad Channel 16-Bit, 100-MSPS High-SNR ADC

www.ti.com
ADS5263
SLAS760C – MAY 2011 – REVISED JANUARY 2013
A7–A0 D15 D14 D13 D12 D11 D10 D9 D8
D7
D6
D5
D4
D3
D2
D1
D0
IN HEX
2C
0
0
0
0
0
0
0
0 <AVG OUT 4> <AVG OUT 3> <AVG OUT 2> <AVG OUT 1>
<AVG OUT 1>
00
01
10
11
<AVG OUT 2>
00
01
10
11
<AVG OUT 3>
00
01
10
11
<AVG OUT 4>
00
01
10
11
These bits determine which data stream is output on LVDS pins OUT1A/1B.
(after global enable bit for averaging is enabled <EN AVG GLO> = 1)
LVDS OUT1A/1B buffers are powered down.
OUT1A/1B output digital data corresponding to the signal applied on analog input pin IN1.
OUT1A/1B output digital data corresponding to the average of signals applied on analog
input pins IN1 and IN2.
OUT1A/1B output digital data corresponding to the average of signals applied on analog
input pins IN1, IN2, IN3, and IN4.
These bits determine which data stream is output on LVDS pins OUT2A/2B
(after global enable bit for averaging is enabled <EN AVG GLO> = 1)
LVDS OUT2A/2B buffers are powered down.
OUT2A/2B output digital data corresponding to the signal applied on analog input pin IN2.
OUT2A/2B output digital data corresponding to the signal applied on analog input pin IN3.
OUT2A/2B output digital data corresponding to the average of signals applied on analog
input pins IN3 and IN4.
These bits determine which data stream is output on LVDS pins OUT3A/3B
(after global enable bit for averaging is enabled <EN AVG GLO> = 1)
LVDS OUT3A/3B buffers are powered down.
OUT3A/3B output digital data corresponding to the signal applied on analog input pin IN3.
OUT3A/3B output digital data corresponding to the signal applied on analog input pin IN2.
OUT3A/3B output digital data corresponding to the average of signals applied on analog
input pins IN1 and IN4.
These bits determine which data stream is output on LVDS pins OUT4A/4B
(after global enable bit for averaging is enabled <EN AVG GLO> = 1)
LVDS OUT4A/4B buffers are powered down.
OUT4A/4B output digital data corresponding to the signal applied on analog input pin IN4.
OUT4A/4B output digital data corresponding to the average of signals applied on analog
input pins IN3 and IN4.
OUT4A/4B output digital data corresponding to the average of signals applied on analog
input pins IN1, IN2, IN3, and IN4.
Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links :ADS5263
Submit Documentation Feedback
27