CC2650_15 Datasheet, PDF (20/52 Pages) Texas Instruments – CC2650 SimpleLink Multistandard Wireless MCU

CC2650
SWRS158 – FEBRUARY 2015
www.ti.com
Battery Monitor (continued)
Measured on Texas Instruments CC2650EM-5XD reference design with T_c=25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX
UNIT
Accuracy
13
mV
5.19 Continuous Time Comparator
T_c=25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
Input voltage range
External reference voltage
Internal reference voltage
DCOUPL as reference
Offset
Hysteresis
Decision time
Current consumption when enabled⁽¹⁾
Step from -10mV to +10mV
(1) Additionally the bias module needs to be enabled when running in standby mode.
5.20 Low-Power Clocked Comparator
T_c=25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
Input voltage range
0
Clock frequency
Internal reference voltage, VDDS / 2
Internal reference voltage, VDDS / 3
Internal reference voltage, VDDS / 4
Internal reference voltage, DCOUPL / 1
Internal reference voltage, DCOUPL / 2
Internal reference voltage, DCOUPL / 3
Internal reference voltage, DCOUPL / 4
Offset
Hysteresis
Decision time
Step from -50mV to +50mV
Current consumption when enabled
MIN TYP MAX
UNIT
0
V_DDS
V
0
V_DDS
V
1.27
V
3
mV
<2
mV
0.72
µs
8.6
µA
TYP
32
1.49 - 1.51
1.01 - 1.03
0.78 - 0.79
1.25 - 1.28
0.63 - 0.65
0.42 - 0.44
0.33 - 0.34
<2
<5
<1
362
MAX
V_DDS
UNIT
V
kHz
V
V
V
V
V
V
V
mV
mV
clock-cycle
nA
5.21 Programmable Current Source
T_c=25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
Current source programmable output range
TEST CONDITIONS
Resolution
Current consumption⁽¹⁾
Including current source at maximum
programmable output
(1) Additionally the bias module needs to be enabled when running in standby mode.
MIN TYP
0.25 -
20
0.25
23
MAX
UNIT
µA
µA
µA
20
Specifications
Submit Documentation Feedback
Product Folder Links: CC2650
Copyright © 2015, Texas Instruments Incorporated