CC2650_15 Datasheet, PDF (16/52 Pages) Texas Instruments – CC2650 SimpleLink Multistandard Wireless MCU

CC2650
SWRS158 – FEBRUARY 2015
www.ti.com
1-Mbps GFSK (Bluetooth Low Energy) – RX (continued)
Measured on Texas Instruments CC2650EM-5XD reference design with T_c=25°C, V_DDS = 3.0 V, f_RF = 2440 MHz, unless
otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Spurious emissions, 30 to 1000
MHz
Conducted measurement in a 50 Ω single-ended load. Suitable
for systems targeting compliance with EN 300 328, EN 300 440
class 2, FCC CFR47, Part 15 and ARIB STD-T-66
–71
dBm
Spurious emissions, 1 to 12.75
GHz
Conducted measurement in a 50 Ω single-ended load. Suitable
for systems targeting compliance with EN 300 328, EN 300 440
class 2, FCC CFR47, Part 15 and ARIB STD-T-66
–62
dBm
RSSI dynamic range
70
dB
RSSI accuracy
±4
dB
5.8 1-Mbps GFSK (Bluetooth Low Energy) – TX
Measured on Texas Instruments CC2650EM-5XD reference design with T_c=25°C, V_DDS = 3.0 V, f_RF = 2440 MHz, unless
otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Output power, highest setting
Differential mode, delivered to a single-ended 50-Ω load
through a balun
+5
dBm
Output power, highest setting
Measured on CC2650EM-4XS, delivered to a single-ended
50-Ω load
+2
dBm
Output power, lowest setting Delivered to a single-ended 50-Ω load through a balun
–21
dBm
f < 1 GHz, outside restricted bands
–43
dBm
f < 1 GHz, restricted bands ETSI
–65
dBm
Spurious emission conducted f < 1 GHz, restricted bands FCC
measurement
f > 1 GHz, including harmonics
–76
dBm
–46
dBm
Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328
and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
5.9 1-Mbps GFSK (Bluetooth Low Energy) – Common RX/TX
Measured on Texas Instruments CC2650EM-5XD reference design with T_c=25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Frequency error tolerance
Difference between center frequency of the
received RF signal and local oscillator frequency.
-350
+350
kHz
Data rate error tolerance
-750
+750
ppm
5.10 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – RX
Measured on Texas Instruments CC2650EM-5XD reference design with T_c=25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Receiver sensitivity
Differential mode. Measured at the CC2650EM-5XD
SMA connector, PER = 1%
–100
dBm
Receiver sensitivity
Single-ended mode. Measured on CC2650EM-4XS,
at the SMA connector, PER = 1%
–97
dBm
Receiver saturation
Measured at the CC2650EM-5XD SMA connector,
PER = 1%
+4
dBm
Adjacent channel rejection
Wanted signal at -82 dBm, modulated interferer at
±5 MHz, PER = 1%
39
dB
Alternate channel rejection
Wanted signal at -82 dBm, modulated interferer at
±10 MHz, PER = 1%
52
dB
Channel rejection, ±15 MHz or
more
Wanted signal at -82 dBm, undesired signal is IEEE
802.15.4 modulated channel, stepped through all
channels 2405 to 2480 MHz, PER = 1%
57
dB
Blocking/desensitization,
5 MHz from upper band edge
Wanted signal at -97 dBm (3 dB above the
sensitivity level), CW jammer, PER = 1%
64
dB
16
Specifications
Submit Documentation Feedback
Product Folder Links: CC2650
Copyright © 2015, Texas Instruments Incorporated